 |
Direct-Reading Instruments |
|
|
Video Exposure Monitoring (VEM) |
|
|
|
With this technique, worker exposures are monitored with direct-reading instruments
while workplace activities are simultaneously recorded on videotape.
- Analyzing Workplace Exposure Using Direct Reading
Instruments and Video Exposure Monitoring Techniques. US Department
of Health and Human Services (DHHS), National Institute for Occupational
Safety and Health (NIOSH) Publication No. 92-104, (1992, August). Contains information on techniques, equipment, data
analysis, and also includes case studies.
- A program that generates a graphical representation of a worker's exposure.
The program reads a real-time data file, generates a bar
(216 KB
ZIP*) or plot (226 KB
ZIP*) to represent
the magnitude of the exposure, and then display the bar or plot on the screen.
When the program is run through a video overlay system, a video recording
graphically shows how a worker's exposure is influenced by work activity.
- National Institute for Occupational Safety and Health (NIOSH).
Provides studies that utilized video exposure monitoring techniques as
part of the assessment process.
- Control
Technology for Autobody Repair and Painting Shops at Church Brother's Collision Repair,
Greenwood, Indiana. Report No. ECTB 179-11a, (1992, March).
- Control
Technology for Autobody Repair and Painting Shops at Kay Parks/Dan Meyer Autorebuild,
Tacoma, Washington. Report No. ECTB 179-12a, (1992, September).
- Control
Technology for Autobody Repair and Painting Shops at Valley Paint and Body Shop, Amelia,
Ohio. Report No. ECTB 179-14a, (1993, May).
- Control
Technology for Autobody Repair and Painting Shops at Jeff Wyler Autobody Shop, Batavia,
Ohio. Report No. ECTB 179-15a, (1993, May).
- Control
Technology for Autobody Repair and Painting Shops at Cincinnati Collision Autobody Shop.
Report No. ECTB 179-16a, (1993, September 21).
- Control
Technology for the Welding Operations at Boilermaker's National Apprenticeship Training
School, Kansas City, Kansas. Report No. ECTB 214-13a, (1997, June 27).
- Concentration
of Metalworking Mists Before and After Installation of a Commercial Air Cleaner at
Sauer-Sundstrand Company, Ames, Iowa. Report No. ECTB 218-12a, (1997, July 25).
- Characterization
of Metalworking Mists During the Evaluation of a Commercial Air Cleaner at
Sauer-Sundstrand Company, LaSalle, Illinois. Report No. ECTB 218-13a, (1997, July).
- Control
of Health and Safety Hazards in Commercial Drycleaners: Chemical Exposures, Fire Hazards,
and Ergonomic Risk Factors. Publication No. 97-150, (1997, December).
(See the Methodology
section).
- Cooper T, Gressel G. Real-time data evaluation at a bag-emptying operation:
a case study. Appl Occup Environ Hyg. 1992;7:227-30.
- Gressel, et al. Video Exposure Monitoring—A Means of Studying Sources of
Occupational Air Contaminant Exposure, Part 1—Video Exposure Monitoring
Techniques. Applied Occupational and Environmental Hygiene. 1993
Apr;8(4):334-8.
- Heitbrink, et al., Video Exposure Monitoring—A Means of Studying Sources of
Occupational Air Contaminant Exposure, Part 2—Data Interpretation. Applied
Occupational and Environmental Hygiene. 1993 Apr;8(4):339-43.
- Gressel MG, Heitbrink WA, et al. Advantages of real-time data acquisition
for exposure assessment. Appl Ind Hyg. 1988;3(11):316-20.
*These files are for downloading. |
|
|
|
RSS Feeds
Print This Page
Text Size
