1
08/31/2021 Trip and Emergency Switches on Mills and Calenders
2
08/31/2021 Trip and Emergency Switches on Mills and Calenders
3
08/24/2005 Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes.
4
04/22/2005 Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
5
02/08/2005
Use of the European Norms and European Community machinery directive to comply with the 1910.212 "General [guarding] requirements for all machines."
6
02/11/2004
Use of laser guarding systems with hydraulic press brakes
7
06/05/2001 Use of Electro Sensitive Protection Equipment as point of operation guarding devices.
8
02/26/1999 OSHA enforcement policy on vertical food mixers.
9
09/20/1994 Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
10
09/20/1994
Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
11
08/05/1992 Presence Sensing Palm Button Devices (PSPBD).
12
04/15/1991 Clarification of Scope of OSHA Instruction STD 1-12.22
13
03/19/1991 The point of operation and rotating part hazards related to vertical food mixers in bakeries and restaurants are covered by the Occupational Safety and Health Administration standards.
14
08/03/1989 The feasibility of OSHA's machine guarding requirements in their workplace.
15
11/02/1987 Acceptable guarding for continuous cycling boneless meat tenderizers.
16
08/08/1986 The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns)
17
04/20/1986 Power Press Brakes.
18
03/25/1985 Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools
19
03/25/1985 Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools
20
05/26/1981 The manner in which OSHA provides for suitable applications of the ANSI B11.3 specification standard.
21
12/15/1980 Oil Rig Inspection.
22
05/14/1976 A variance from Machine Guarding, Point of Operation Guarding.
23
02/18/1976 Point of operation guarding for cutters on milling machines.
24
02/18/1976 Point of operation guarding for cutters on milling machines.
25
02/18/1976 Point of operation guarding for cutters on milling machines.
26
02/18/1976 Point of operation guarding for cutters on milling machines.
27
02/18/1976 Point of operation guarding for cutters on milling machines.
28
02/18/1976 Point of operation guarding for cutters on milling machines.
29
02/18/1976 Point of operation guarding for cutters on milling machines.
30
02/18/1976 Point of operation guarding for cutters on milling machines.
31
02/18/1976 Point of operation guarding for cutters on milling machines.
32
02/18/1976 Point of operation guarding for cutters on milling machines.
33
02/18/1976 Point of operation guarding for cutters on milling machines.
34
02/18/1976 Point of operation guarding for cutters on milling machines.
35
02/18/1976 Point of operation guarding for cutters on milling machines.
36
02/18/1976 Point of operation guarding for cutters on milling machines.
37
02/18/1976 Point of operation guarding for cutters on milling machines.
38
02/18/1976 Point of operation guarding for cutters on milling machines.
39
08/12/1975 Chain saw blade guard not required if it inhibits work or is a hazard.
40
01/07/1975 Guarding by location is permitted with certain provisions.
