1
08/16/2023 Minimum approach distance (MAD)
2
10/02/2015
Minimum approach distances to electric power transmission and distribution lines during the installation of protective grounds
3
08/16/2023 Minimum approach distance (MAD)
4
05/03/2021 Minimum approach distance (MAD) requirements covered under 1910.269 when installing protective grounding equipment
5
12/22/2016 Enforcement of minimum approach distance requirements in 29 CFR 1910.269 and 29 CFR Part 1926, Subpart V
6
01/20/2016 Extended enforcement dates for minimum approach distances to electrical power lines
7
01/20/2016 Extended enforcement dates for minimum approach distances to electrical power lines
8
10/02/2015 Heat energy estimates for arc-rated protective clothing and faceshields for open-air work on multi-phase overhead power lines.
9
10/02/2015 Minimum approach distances to electric power transmission and distribution lines during the installation of protective grounds
10
10/02/2015
Heat energy estimates for arc-rated protective clothing and faceshields for open-air work on multi-phase overhead power lines.
11
07/13/2015 Requirements for protective clothing and equipment in the Electric Power Generation, Transmission and Distribution Standard.
12
07/13/2015 Selecting protective clothing based on the IEEE National Electrical Safety Code, C-2, 2012, Table 410-1
13
07/13/2015 Selecting protective clothing based on the IEEE National Electrical Safety Code, C-2, 2012, Table 410-1
14
07/13/2015 Selecting protective clothing based on the IEEE National Electrical Safety Code, C-2, 2012, Table 410-1
15
07/13/2015
Requirements for protective clothing and equipment in the Electric Power Generation, Transmission and Distribution Standard.
16
02/03/2010 Clarification on number of qualified employees required when working with electrical components.
17
02/03/2010 Clarification on number of qualified employees required when working with electrical components.
18
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
19
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
20
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
21
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
22
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
23
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
24
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
25
10/04/2006 Requirements for embroidery on flame-resistant clothing under 29 CFR 1910.269.
26
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
27
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
28
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
29
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
30
09/01/2006
Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
31
04/25/2006 Conditions rendering underground electrical power connections as unsafe to touch with bare hands.
32
04/25/2006 Conditions rendering underground electrical power connections as unsafe to touch with bare hands.
33
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
34
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
35
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
36
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
37
10/05/2004 Grounding requirements for aerial lifts (bucket trucks) under the General Industry 1910.269 and Construction 1926.952 standards.
38
09/16/2003 Minimum number of employees required for performing electric power work conducted from bucket trucks.
39
09/16/2003 Minimum number of employees required for performing electric power work conducted from bucket trucks.
40
05/27/2003 OSHA does not specify payment requirements for apparel covered in the Electrical Power Transmission and Distribution Standard.
41
03/27/2003 Clarification of qualified employee requirements for the Electric Power Generation, Transmission, and Distribution standard.
42
08/27/2001 Two employees must be present during work on energized systems >600 volts
43
08/27/2001 Two employees must be present during work on energized systems >600 volts
44
02/10/2000 Exceptions to minimum approach distances for power generation, transmission and distribution
45
02/10/2000 Exceptions to minimum approach distances for power generation, transmission and distribution
46
10/26/1999 Minimum approach distances when using insulating gloves and sleeves.
47
08/03/1999 Appropriate safety practices for the removal of electrical meters.
48
08/03/1999 Appropriate safety practices for the removal of electrical meters.
49
02/22/1999 CPR/first aid training and "working alone" provisions of 1910.269
50
06/22/1998 Stress cone work: worker protection and job briefings
51
06/22/1998
Stress cone work: worker protection and job briefings
