1
11/10/2009 - 1910.303(b)(2) - Confidentiality of employee post-exposure evaluations as it pertains to the Bloodborne Pathogens Standard; use of portable fans in phlebotomy collection rooms.
2
07/24/2006 - 1910.303(b)(1) - Approval of employee-furnished equipment for use in hazardous locations; definition of "electric utilization equipment."
3
10/27/2005 - 1910.303(b)(2) - Acceptability of using a light switch as a disconnecting means for the electrical lockout/tagout standard.
4
02/01/2005 - 1910.303(b)(2) - Use of personal cooling fans listed for "residential use only" in an industrial setting.
5
01/31/2005 - 1910.303(b)(2) - Requirements for protecting against the automatic restart of low-voltage light-duty woodworking and metalworking equipment following an unscheduled electrical outage.
6
05/11/2004
- 1910.303(b) -
Electrical equipment approved by a NRTL is acceptable to OSHA.
7
08/26/2003 - 1910.303(b)(2) - Installation and use of electrical equipment must be consistent with NRTL intructions for that equipment.
8
07/16/2003 - 1910.303(b)(2) - Workplace use of electrical equipment designated as "Household Use Only" and recordkeeping requirements.
9
07/16/2003
- 1910.303(b)(2), 1910.303(b) -
Workplace use of electrical equipment designated as "Household Use Only" and recordkeeping requirements.
10
05/27/2003 - 1910.303(b)(2) - Electrical conductors and equipment must be approved and used according to its listing/label.
11
11/18/2002 - 1910.303(b)(2) - Compliance requirements for relocatable power taps or "power strips"
12
08/08/2002 - 1910.303(b)(2) - Applicable OSHA standards and safety considerations for microwave device use in a laboratory
13
04/28/1999 - 1910.303(b)(1) - Clarification of under voltage protection on metal-working equipment and emergency stop devices.
14
06/17/1992 - 1910.303(b)(1)(i) - Acceptable job-made extension cords.
15
02/28/1990 - 1910.303(b)(2) - The listing requirements in the U.S. for Industrial Packaging equipment.