Label abbreviations descriptions

DISULFIRAM

Chemical Identification
CAS # 97-77-8
Formula

C₁₀H₂₀N₂S₄
Synonyms

Antabuse; bis(Diethylthiocarbamoyl) disulfide; tetraethylthiuram disulfide; Ro-Sulfiram; TETD

Physical Properties
Physical description White, yellowish, or light-gray powder with a slight odor.
Boiling point 243°F Molecular weight 296.6
Freezing point/melting point 158°F Vapor pressure 0 mmHg
Flash point Vapor density
Specific gravity 1.3 Ionization potential
Lower explosive limit (LEL) Upper explosive limit (UEL)
NFPA health rating 2 NFPA fire rating 1
NFPA reactivity rating 0 NFPA special instruction
Vapor hazard ratio (VHR)
Historical exceedance percentage
Target organs

Monitoring Methods Used by OSHA
Analyte code (IMIS no.)
Sampling group
Sampler/Sampling media
Sampling time*
Sampling volume (TWA)*
Sampling flow rate (TWA)*
Sampling volume (STEL/Peak/C)*
Sampling flow rate (STEL/Peak/C)*
Analytical method instruments
Method reference
Notes
Special requirements

* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.

Bulk/Wipe Method
Wipe Sampler/Sampling media
Bulk Method

On-Site Screening Techniques
Device
Model/Type
Sampling information
(see manufacturer instructions)

Exposure Limits
OSHA PEL
8-hour TWA
(ST) STEL
(C) Ceiling
Peak
NIOSH REL
Up to 10-hour TWA
(ST) STEL
(C) Ceiling
ACGIH TLV©
8-hour TWA
(ST) STEL
(C) Ceiling
CAL/OSHA PEL
8-hour TWA
(ST) STEL
(C) Ceiling
Peak
PEL-TWA REL-TWA

2 mg/m³

 TLV-TWA

2 mg/m³ [1979]

 PEL-TWA

2 mg/m³
PEL-STEL REL-STEL TLV-STEL PEL-STEL
PEL-C REL-C TLV-C PEL-C
Skin notation

NA

 Skin notation

N

 Skin notation

N

 Skin notation

N
Notes:

Not established

 Notes: Notes: Notes:
Health factors:  See NIH-NLM PubChem. IDLH
Carcinogenic classifications: TLV-A4, IARC-3 Notes:
AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3:

Additional Resources and Literature References

Last Updated Date : 12/28/2020