[Federal Register Volume 79, Number 168 (Friday, August 29, 2014)][Notices][Pages 51623-51624]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-20560]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2006-0028]
MET Laboratories, Inc.: Grant of Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces its final decision to expand
the scope of recognition for MET Laboratories, Inc., as a Nationally
Recognized Testing Laboratory (NRTL).
DATES: The renewal of recognition becomes effective on August 29, 2014.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, 200 Constitution Avenue
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
email: Meilinger.francis2@dol.gov.
General and technical information: Contact Mr. David Johnson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, 200
Constitution Avenue NW., Room N-3655, Washington, DC 20210; telephone:
(202) 693-2110; email: johnson.david.w@dol.gov. OSHA's Web page
includes information about the NRTL Program (see
http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of MET Laboratories, Inc. (MET), as an NRTL. MET's
expansion covers the addition of one test standard to its scope of
recognition.
OSHA recognition of an NRTL signifies that the organization meets
the requirements specified by 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition, and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification of the products.
The Agency processes applications by an NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding and, in the second
notice, the Agency provides its final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational Web page
for each NRTL that details its scope of recognition. These pages are
available from the Agency's Web site at
http://www.osha.gov/dts/otpca/nrtl/index.html.
MET submitted an application, dated December 13, 2011 (OSHA-2006-
0028-0015--MET Expansion Application for UL 2202), to expand its
recognition to include one additional test standard. OSHA staff
reviewed MET's application and other pertinent information. OSHA did
not perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing MET's expansion
application in the Federal Register on May 6, 2014 (79 FR 25894). The
Agency requested comments by May 21, 2014, but it received no comments
in response to this notice. OSHA now is proceeding with this final
notice to grant expansion of MET's scope of recognition.
To obtain or review copies of all public documents pertaining to
MET's application, go to www.regulations.gov or contact the Docket
Office, Occupational Safety and Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC
20210. Docket No. OSHA-2006-0028 contains all materials in the record
concerning MET's recognition.
II. Final Decision and Order
OSHA staff examined MET's expansion application, its capability to
meet the requirements of the test standards, and other pertinent
information. Based on its review of this evidence, OSHA finds that MET
meets the requirements of 29 CFR 1910.7 for expansion of its
recognition, subject to the limitation and conditions listed below.
OSHA limits the expansion of MET's recognition to testing and
certification of products for demonstration of conformance to the
following test standard, which OSHA determined is an appropriate test
standard within the meaning of 29 CFR 1910.7(c):
Table 1--Appropriate Test Standard for Inclusion in MET's NRTL Scope of
Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 2202................................ Electric Vehicle (EV) Charging
System Equipment.
------------------------------------------------------------------------
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, an
NRTL's scope of recognition does not include those products.
The American National Standards Institute (ANSI) may approve the
test standard listed above as an American National Standard. However,
for convenience, we may use the designation of the standards-developing
organization for the standard as opposed to the ANSI designation. Under
the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C,
paragraph XIV), any NRTL recognized for a particular test standard may
use either the proprietary version of the test standard or the ANSI
version of that standard. Contact ANSI to determine whether a test
standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
MET must abide by the following conditions of the recognition:
1. MET must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as an NRTL, and provide details of the
change(s);
2. MET must meet all the terms of its recognition and comply with
all OSHA policies pertaining to this recognition; and
3. MET must continue to meet the requirements for recognition,
including all previously published conditions on MET's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of MET, subject to the limitation and conditions
specified above.
III. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, 200 Constitution Avenue NW.,
Washington, DC 20210, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on August 25, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-20560 Filed 8-28-14; 8:45 am]
BILLING CODE 4510-26-P
