[Federal Register Volume 79, Number 194 (Tuesday, October 7, 2014)][Notices][Pages 60502-60503]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-23898]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2011-0189]
Servicing Multi-Piece and Single Piece Rim Wheels; Extension of
the Office of Management and Budget's (OMB) Approval of Information
Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration, Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning its proposal to
extend the Office of Management and Budget's (OMB) approval of the
information collection requirements specified in the Standard on
Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177).
The paperwork provisions of the Standard includes a requirement that
the manufacturer or a Registered Professional Engineer certify that
repaired restraining devices and barriers meet the strength
requirements specified in the Standard and a requirement that defective
wheels and wheel components be marked or tagged.
DATES: Comments must be submitted (postmarked, sent, or received) by
December 8, 2014.
ADDRESSES: Electronically: You may submit comments and attachments
electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, Docket No. OSHA-2011-0189,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier services) are
accepted during the Department of Labor's and Docket Office's normal
business hours, 8:15 a.m. to 4:45 p.m., e.t.
Instructions: All submissions must include the Agency name and OSHA
docket number (OSHA-2011-0189) for the Information Collection Request
(ICR). All comments, including any personal information you provide,
are placed in the docket without change and may be made available
online at http://www.regulations.gov. For further information on
submitting comments see the "Public Participation" heading in the
section of this notice titled "SUPPLEMENTARY INFORMATION."
Docket: To read or download comments or other materials in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the http://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accord with the Paperwork Reduction Act of
1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires that OSHA obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce to
the maximum extent feasible unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Certification of repair (Sec. 1910.177(d)(3)(iv)). This paragraph
requires that when restraining devices and barriers are removed from
service because they are defective, they shall not be returned to
service until they are repaired and reinspected. If the repair is
structural, the manufacturer or a Registered Professional Engineer must
certify that the strength requirements specified in (Sec.
1910.177(d)(3)(i) of the Standard have been met.
The certification records are used to assure that equipment has
been properly repaired. The certification records also provide the most
efficient means for OSHA compliance officers to determine that an
employer is complying with the Standard.
Marking or tagging of wheel components (Sec. 1910.177(e)(2)). This
paragraph requires that defective wheels and wheel components "be
marked or tagged unserviceable and removed from the service area."
Under this requirement, OSHA is providing employers with sufficient
information from which they can derive the wording to use in marking
the object or constructing a tag. Therefore, this provision imposes no
paperwork burden because it falls within the portion of 5 CFR
1320(c)(2) that states, "The public disclosure of information
originally supplied by the Federal government to the recipient for the
purpose of disclosure to the public is not included within this
definition [of `collection of information']".
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information
collection requirements contained in the Standard on Servicing Multi-
Piece and Single Piece Rim Wheels (29 CFR 1910.177). OSHA is proposing
to retain its current burden hour estimate of one (1) hour. The Agency
will summarize any comments submitted in response to this notice and
will include this summary in its request to OMB.
Type of Review: Extension of a currently approved collection.
Title: Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR
1910.177).
OMB Control Number: 1218-0219.
Affected Public: Business or other for-profits.
Number of Respondents: 80.
Frequency of Responses: On occasion.
Average Time per Response: Three (3) minutes (.05 hour) to maintain
a certificate verifying proper repair of a restraining device or
barrier and to disclose the repair certificate to an OSHA Compliance
Officer.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other materials must identify the Agency
name and the OSHA docket number (Docket No. OSHA-2011-0189) for the
ICR. You may supplement electronic submissions by uploading document
files electronically. If you wish to mail additional materials in
reference to an electronic or facsimile submission, you must submit
them to the OSHA Docket Office (see the section of this notice titled
"ADDRESSES"). The additional materials must clearly identify your
electronic comments by your name, date, and the docket number so the
Agency can attach them to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at
http://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
date of birth. Although all submissions are listed in the
http://www.regulations.gov index, some information (e.g., copyrighted
material) is not publically available to read or download from this Web
site. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the http://www.regulations.gov Web site to submit comments and
access the docket is available at the Web site's "User Tips" link.
Contact the OSHA Docket Office for information about materials not
available from the Web site, and for assistance in using the Internet
to locate docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on October 1, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-23898 Filed 10-6-14; 8:45 am]
BILLING CODE 4510-26-P
