[Federal Register Volume 79, Number 245 (Monday, December 22, 2014)][Notices][Pages 76391-76393]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2014-29823]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2013-0016]
Nemko-CCL, Inc.: Application for Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the application of Nemko-CCL,
Inc. for expansion of its recognition as a Nationally Recognized
Testing Laboratory (NRTL) and presents the Agency's preliminary finding
to grant the application.
DATES: Submit comments, information, and documents in response to this
notice, or requests for an extension of time to make a submission, on
or before January 6, 2015.
ADDRESSES: Submit comments by any of the following methods:
1. Electronically: Submit comments and attachments electronically
at http://www.regulations.gov, which is the Federal eRulemaking Portal.
Follow the instructions online for making electronic submissions.
2. Facsimile: If submissions, including attachments, are not longer
than 10 pages, commenters may fax them to the OSHA Docket Office at
(202) 693-1648.
3. Regular or express mail, hand delivery, or messenger (courier)
service: Submit comments, requests, and any attachments to the OSHA
Docket Office, Docket No. OSHA-2013-0016, Technical Data Center, U.S.
Department of Labor, 200 Constitution Avenue NW., Room N-2625,
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays
in receiving comments and other written materials by regular mail.
Contact the OSHA Docket Office for information about security
procedures concerning delivery of materials by express mail, hand
delivery, or messenger service. The hours of operation for the OSHA
Docket Office are 8:15 a.m.-4:45 p.m., e.t.
4. Instructions: All submissions must include the Agency name and
the OSHA docket number (OSHA-2013-0016). OSHA places comments and other
materials, including any personal information, in the public docket
without revision, and these materials will be available online at
http://www.regulations.gov. Therefore, the Agency cautions commenters
about submitting statements they do not want made available to the
public, or submitting comments that contain personal information
(either about themselves or others) such as Social Security numbers,
birth dates, and medical data.
5. Docket: To read or download submissions or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g.,
copyrighted material) is not publicly available to read or download
through the Web site. All submissions, including copyrighted material,
are available for inspection and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for assistance in locating docket
submissions.
6. Extension of comment period: Submit requests for an extension of
the comment period on or before January 6, 2015 to the Office of
Technical Programs and Coordination Activities, Directorate of
Technical Support and Emergency Management, Occupational Safety and
Health Administration, U.S. Department of Labor, 200 Constitution
Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-
1644.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, 200 Constitution Avenue
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
email: Meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Acting Director, Office of Technical Programs and Coordination
Activities, Directorate of Technical Support and Emergency Management,
Occupational Safety and Health Administration, U.S. Department of
Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210;
phone: (202) 693-2110 or email: robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for Expansion
The Occupational Safety and Health Administration is providing
notice that Nemko-CCL, Inc. (CCL), is applying for expansion of its
current recognition as an NRTL. CCL requests the addition of two test
standards to its NRTL scope of recognition.
OSHA recognition of an NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition. Each NRTL's scope of recognition includes (1) the
type of products the NRTL may test, with each type specified by its
applicable test standard; and (2) the recognized site(s) that has/have
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope.
Recognition is not a delegation or grant of government authority;
however, recognition enables employers to use products approved by the
NRTL to meet OSHA standards that require product testing and
certification.
The Agency processes applications by an NRTL for initial
recognition and for an expansion or renewal of this recognition,
following requirements in Appendix A to 29 CFR 1910.7. This appendix
requires that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding. In the second notice,
the Agency provides its final decision on the application. These
notices set forth the NRTL's scope of recognition or modifications of
that scope. OSHA maintains an informational Web page for each NRTL,
including CCL, which details the NRTL's scope of recognition. These
pages are available from the OSHA Web site at http://www.osha.gov/dts/otpca/nrtl/index.html.
CCL currently has one facility recognized by OSHA for product
testing and certification, with its headquarters located at: 1940 West
Alexander Street, Salt Lake City, Utah 84119-2039. A complete list of
CCL's scope of recognition is available at https://www.osha.gov/dts/otpca/nrtl/ccl.html.
II. General Background on the Application
CCL submitted an application, dated June 30, 2014 (Exhibit 1), to
expand its recognition to include two additional test standards. OSHA
staff performed a detailed analysis of the application packet and
reviewed other pertinent information. OSHA did not perform any on-site
reviews in relation to this application.
Table 1 below lists the appropriate test standards found in CCL's
application for expansion for testing and certification of products
under the NRTL Program.
Table 1--Proposed List of Appropriate Test Standards for Inclusion in
CCL's NRTL Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
ANSI/AAMI ES60601-1: 2005/(R)2012. Medical electric equipment_Part 1:
General requirements for basic
safety and essential performance.
UL 60601_1........................ Medical Electrical Equipment_Part 1:
General Requirements for Safety.
------------------------------------------------------------------------
III. Preliminary Findings on the Application
CCL submitted an acceptable application for expansion of its scope
of recognition. OSHA's review of the application file, and pertinent
documentation, indicate that CCL can meet the requirements prescribed
by 29 CFR 1910.7 for expanding its recognition to include the addition
of these two test standards for NRTL testing and certification listed
above. This preliminary finding does not constitute an interim or
temporary approval of CCL's application.
OSHA welcomes public comment as to whether CCL meets the
requirements of 29 CFR 1910.7 for expansion of its recognition as an
NRTL. Comments should consist of pertinent written documents and
exhibits. Commenters needing more time to comment must submit a request
in writing, stating the reasons for the request. Commenters must submit
the written request for an extension by the due date for comments. OSHA
will limit any extension to 10 days unless the requester justifies a
longer period. OSHA may deny a request for an extension if the request
is not adequately justified. To obtain or review copies of the exhibits
identified in this notice, as well as comments submitted to the docket,
contact the Docket Office, Room N-2625, Occupational Safety and Health
Administration, U.S. Department of Labor, at the above address. These
materials also are available online at http://www.regulations.gov under
Docket No. OSHA-2013-0016.
OSHA staff will review all comments to the docket submitted in a
timely manner and, after addressing the issues raised by these
comments, will recommend to the Assistant Secretary for Occupational
Safety and Health whether to grant CCL's application for expansion of its scope of
recognition. The Assistant Secretary will make the final decision on
granting the application. In making this decision, the Assistant
Secretary may undertake other proceedings prescribed in Appendix A to
29 CFR 1910.7. OSHA will publish a public notice of its final decision
in the Federal Register.
IV. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, 200 Constitution Avenue NW.,
Washington, DC 20210, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on December 15, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-29823 Filed 12-19-14; 8:45 am]
BILLING CODE 4510-26-P
