[Federal Register Volume 80, Number 87 (Wednesday, May 6, 2015)][Notices][Pages 26097-26098]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-10549]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2013-0016]
Nemko-CCL: Grant of Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces its final decision to expand
the scope of recognition for CCL, as a Nationally Recognized Testing
Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
May 6, 2015.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, 200 Constitution Avenue
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
email: meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor,
200 Constitution Avenue NW., Room N-3655, Washington, DC
20210; telephone: (202) 693-2110; email: robinson.kevin@dol.gov. OSHA's
Web page includes information about the NRTL Program
(see http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of Nemko-CCL (CCL) as an NRTL. CCL's expansion covers the
addition of two test standards to its scope of recognition.
OSHA recognition of an NRTL signifies that the organization meets
the requirements specified by 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification of the products.
The Agency processes applications by an NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding and, in the second
notice, the Agency provides its final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational Web page
for each NRTL that details its scope of recognition. These pages are
available from the Agency's Web site at
http://www.osha.gov/dts/otpca/nrtl/index.html.
CCL submitted an application dated July 1, 2014, (OSHA-2013-0016,
Exhibit 1--CCL 5453 Expansion Application) to expand its recognition to
include two additional test standards. OSHA staff performed a
comparability analysis and reviewed other pertinent information. OSHA
did not perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing CCL's expansion
application in the Federal Register on December 22, 2014 (79 FR 76391).
The Agency requested comments by January 6, 2015, but it received no
comments in response to this notice. OSHA now is proceeding with this
final notice to grant expansion of CCL's scope of recognition.
To obtain or review copies of all public documents pertaining to
CCL's application, go to www.regulations.gov or contact the Docket
Office, Occupational Safety and Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC
20210. Docket No. OSHA-2013-0006 contains all materials in the record
concerning CCL's recognition.
II. Final Decision and Order
OSHA staff examined CCL's expansion application, its capability to
meet the requirements of the test standards, and other pertinent
information. Based on its review of this evidence, OSHA finds that CCL
meets the requirements of 29 CFR 1910.7 for expansion of its
recognition, subject to the limitation and conditions listed below.
OSHA, therefore, is proceeding with this final notice to grant CCL's
scope of recognition. OSHA limits the expansion of CCL's recognition to
testing and certification of products for demonstration of conformance
to the test standards listed in Table 1 below.
Table 1--List of Appropriate Test Standards for Inclusion in CCL's NRTL
Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
ANSI/AAMI ES60601-1: 2005/(R)2012. Medical electric equipment-Part 1:
General requirements for basic
safety and essential performance.
UL 60601-1........................ Medical Electrical Equipment, Part
1: General Requirements for Safety.
------------------------------------------------------------------------
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, an
NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the
test standards listed above as American National Standards. However,
for convenience, we may use the designation of the standards-developing
organization for the standard as opposed to the ANSI designation. Under
the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C,
paragraph XIV), any NRTL recognized for a particular test standard may
use either the proprietary version of the test standard or the ANSI
version of that standard. Contact ANSI to determine whether a test
standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
CCL must abide by the following conditions of the recognition:
1. CCL must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as an NRTL, and provide details of the
change(s);
2. CCL must meet all the terms of its recognition and comply with
all OSHA policies pertaining to this recognition; and
3. CCL must continue to meet the requirements for recognition,
including all previously published conditions on CCL's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of CCL, subject to the limitation and conditions
specified above.
Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, 200 Constitution Avenue NW.,
Washington, DC 20210, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on April 30, 2015.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2015-10549 Filed 5-5-15; 8:45 am]
BILLING CODE 4510-26-P
