[Federal Register Volume 81, Number 189 (Thursday, September 29, 2016)][Notices][Pages 67003-67004]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-23570]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0037]
Welding, Cutting, and Brazing; Extension of the Office of
Management of Budget's (OMB) Approval of Information Collection
(Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning its proposal to
extend the Office of Management and Budget's (OMB) approval of the
information collection requirements specified in the Welding, Cutting,
and Brazing Standard (29 CFR part 1910, subpart Q).
DATES: Comments must be submitted (postmarked, sent, or received) by
November 28, 2016.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit your comments and attachments
to the OSHA Docket Office, Docket No. OSHA-2010-0037, Occupational
Safety and Health Administration, U.S. Department of Labor, Room N-
2625, 200 Constitution Avenue NW., Washington, DC 20210. Deliveries
(hand, express mail, messenger, and courier service) are accepted
during the Department of Labor's and Docket Office's normal business
hours, 8:15 a.m. to 4:45 p.m., e.t.
Instructions: All submissions must include the Agency name and the
OSHA docket number (OSHA-2010-0037) for the Information Collection
Request (ICR). All comments, including any personal information you
provide, are placed in the public docket without change, and may be
made available online at http://www.regulations.gov. For further
information on submitting comments see the "Public Participation"
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the http://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You also may contact Theda Kenney at
the address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accord with the Paperwork Reduction Act of
1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires that OSHA obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
The information collected is used by employers and workers whenever
welding, cutting and brazing are performed. The purpose of the
information is to ensure that employers evaluate hazards associated
with welding and ensure that adequate measures are taken to make the
process safe.
Section 1910.255(e) requires that a periodic inspection of
resistance welding equipment be made by qualified maintenance
personnel, and that a certification record be generated and maintained.
The certification shall include the date of the inspection, the
signature of the person who performed the inspection and the serial
number, or other identifier, for the equipment inspected. The record
shall be made available to an OSHA inspector upon request. The
maintenance inspection ensures that welding equipment is in safe
operating condition while the maintenance record provides evidence to
workers and Agency compliance officers that employers performed the
required inspections.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
The Agency requests an adjustment increase of 97 burden hours (from
5,635 burden hours to 5,732 burden hours) associated with the
collection of information in the Welding, Cutting, and Brazing
Standard. OSHA will summarize the comments submitted in response to
this notice, and will include this summary in its request to OMB to
extend the approval of the information collection requirements
contained in the Standard.
Type of Review: Extension of a currently approved collection.
Title: Welding, Cutting, and Brazing (29 CFR part, subpart Q).
OMB Control Number: 1218-0207.
Affected Public: Business or other for-profits.
Number of Respondents: 20,471.
Frequency of Responses: On occasion.
Total Responses: 81,884.
Average Time per Response: OSHA estimates it will take 1 minute
(.02 hour) to maintain the inspection certification record to 5 minutes
(.08 hour) for each welder to perform the inspection periodically
(semi-annually).
Estimated Total Burden Hours: 5,732.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile; or (3) by hard copy. All
comments, attachments, and other material must identify the Agency name
and the OSHA docket number for this ICR (Docket No. OSHA-2010-0037).
You may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the Agency can attach them
to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this Web
site. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the http://www.regulations.gov Web site to submit comments and
access the docket is available at the Web site's "User Tips" link.
Contact the OSHA Docket Office for information about materials not
available from the Web site, and for assistance in using the Internet
to locate docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on September 26, 2016.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2016-23570 Filed 9-28-16; 8:45 am]
BILLING CODE 4510-26-P
