[Federal Register Volume 82, Number 227 (Tuesday, November 28, 2017)]
[Notices]
[Pages 56270-56271]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-25570]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2007-0039]
Intertek Testing Services NA, Inc.: Grant of Expansion of
Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces its final decision to expand
the scope of recognition for Intertek Testing Services NA, Inc., as a
Nationally Recognized Testing Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
November 28, 2017.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, 200 Constitution Avenue
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999;
email: meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, 200
Constitution Avenue NW., Room N-3655, Washington, DC 20210; telephone:
(202) 693-2110; email: robinson.kevin@dol.gov. OSHA's Web page includes
information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of Intertek Testing Services NA, Inc. (ITSNA), as a NRTL.
ITSNA's expansion covers the addition of seven test standards to its
scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified by 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification of the products.
The Agency processes applications by a NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding and, in the second
notice, the Agency provides its final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational Web page
for each NRTL that details its scope of recognition. These pages are
available from the Agency's Web site at http://www.osha.gov/dts/otpca/nrtl/index.html.
ITSNA submitted an application, dated April 21, 2015, (OSHA-2007-
0039-0026) to expand its recognition to include seven additional test
standards. OSHA staff conducted a detailed analysis of the application
packet and reviewed other pertinent information. OSHA did not perform
any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing ITSNA's expansion
application in the Federal Register on August 30, 2017 (82 FR 41292).
The Agency requested comments by September 15, 2017, but it received no
comments in response to this notice. OSHA now is proceeding with this
final notice to grant expansion of ITSNA's scope of recognition.
To obtain or review copies of all public documents pertaining to
ITSNA's application, go to www.regulations.gov or contact the Docket
Office, Occupational Safety and Health Administration, U.S. Department
of
Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 20210.
Docket No. OSHA-2007-0039 contains all materials in the record
concerning ITSNA's recognition.
II. Final Decision and Order
OSHA staff examined ITSNA's expansion application, its capability
to meet the requirements of the test standards, and other pertinent
information. Based on its review of this evidence, OSHA finds that
ITSNA meets the requirements of 29 CFR 1910.7 for expansion of its
recognition, subject to the specified limitation and conditions listed
below. OSHA, therefore, is proceeding with this final notice to grant
ITSNA's scope of recognition. OSHA limits the expansion of ITSNA's
recognition to testing and certification of products for demonstration
of conformance to the test standards listed in Table 1 below.
Table 1--List of Appropriate Test Standards for Inclusion in ITSNA's NRTL Scope of Recognition
----------------------------------------------------------------------------------------------------------------
Test standard Test standard title
----------------------------------------------------------------------------------------------------------------
UL 109............................................................. Tube Fittings for Flammable and Combustible
Fluids, Refrigeration Service and Marine
Use.
UL 979............................................................. Water Treatment Appliances.
UL 1429............................................................ Pullout Switches.
UL 1441............................................................ Coated Electrical Sleeving.
UL 2420............................................................ Belowground Reinforced Thermosetting Resin
Conduit (RTRC) and Fittings.
UL 2515............................................................ Aboveground Reinforced Thermosetting Resin
Conduit (RTRC) and Fittings.
UL 60950-21........................................................ Information Technology Equipment--Safety--
Part 21: Remote Power Feeding.
----------------------------------------------------------------------------------------------------------------
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, a
NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the
test standards listed above as American National Standards. However,
for convenience, we may use the designation of the standards-developing
organization for the standard as opposed to the ANSI designation. Under
the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C,
paragraph XIV), any NRTL recognized for a particular test standard may
use either the proprietary version of the test standard or the ANSI
version of that standard. Contact ANSI to determine whether a test
standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
ITSNA must abide by the following conditions of the recognition:
1. ITSNA must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as a NRTL, and provide details of the
change(s);
2. ITSNA must meet all the terms of its recognition and comply with
all OSHA policies pertaining to this recognition; and
3. ITSNA must continue to meet the requirements for recognition,
including all previously published conditions on ITSNA's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of ITSNA, subject to the limitation and conditions
specified above.
III. Authority and Signature
Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational
Safety and Health, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on November 21, 2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-25570 Filed 11-27-17; 8:45 am]
BILLING CODE 4510-26-P
