[Federal Register Volume 82, Number 241 (Monday, December 18, 2017)]
[Notices]
[Pages 60051-60053]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-27122]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2006-0042]
Canadian Standards Association: Application for Expansion of
Recognition and Proposed Modification to the NRTL Program's List of
Appropriate Test Standards
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the application of Canadian
Standards Association (CSA) for expansion of its recognition as a
Nationally Recognized Testing Laboratory (NRTL) and presents the
Agency's preliminary finding to grant the application.
DATES: Submit comments, information, and documents in response to this
notice, or requests for an extension of time to make a submission, on
or before January 2, 2018.
ADDRESSES: Submit comments by any of the following methods:
1. Electronically: Submit comments and attachments electronically
at http://www.regulations.gov, which is the Federal eRulemaking Portal.
Follow the instructions online for making electronic submissions.
2. Facsimile: If submissions, including attachments, are not longer
than 10 pages, commenters may fax them to the OSHA Docket Office at
(202) 693-1648.
3. Regular or express mail, hand delivery, or messenger (courier)
service: Submit comments, requests, and any attachments to the OSHA
Docket Office, Docket No. OSHA-2006-0042, Technical Data Center, U.S.
Department of Labor, 200 Constitution Avenue NW, Room N-3653,
Washington, DC 20210; telephone (202) 693-2350 or TTY number (877) 889-
5627. Note that security procedures may result in significant delays in
receiving comments and other written materials by regular mail. Contact
the OSHA Docket Office for information about security procedures
concerning delivery of materials by express mail, hand delivery, or
messenger service. The hours of operation for the OSHA Docket Office
are 10:00 a.m.-3:00 p.m., e.t.
4. Instructions: All submissions must include the Agency name and
the OSHA docket number (OSHA-2006-0042). OSHA places comments and other
materials, including any personal information, in the public docket
without revision, and these materials will be available online at
http://www.regulations.gov. Therefore, the Agency cautions commenters
about submitting statements they do not want made available to the
public, or submitting comments that contain personal information
(either about themselves or others) such as Social Security numbers,
birth dates, and medical data.
5. Docket: To read or download submissions or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g.,
copyrighted material) is not publicly available to read or download
through the website. All submissions, including copyrighted material,
are available for inspection and copying at the OSHA Docket Office.
Contact the OSHA Docket Office for assistance in locating docket
submissions.
6. Extension of comment period: Submit requests for an extension of
the comment period on or before January 2, 2018 to the Office of
Technical Programs and Coordination Activities, Directorate of
Technical Support and Emergency Management, Occupational Safety and
Health Administration, U.S. Department of Labor, 200 Constitution
Avenue NW, Room N-3655, Washington, DC 20210, or by fax to (202) 693-
1644.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor by phone (202) 693-1999 or
email meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor by phone
(202) 693-2110 or email robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for Expansion
OSHA is providing notice that CSA is applying for expansion of its
current recognition as a NRTL. CSA requests the addition of seven test
standards to its NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR
1910.7. Recognition is an acknowledgment that the organization can
perform independent safety testing and certification of the specific
products covered within its scope of recognition. Each NRTL's scope of
recognition includes (1) the type of products the NRTL may test, with
each type specified by its applicable test standard; and (2) the
recognized site(s) that has/have the technical capability to perform
the product-testing and product-certification activities for test
standards within the NRTL's scope. Recognition is not a delegation or
grant of government authority; however, recognition enables employers
to use products approved by the NRTL to meet OSHA standards that
require product testing and certification.
The Agency processes an application by a NRTL for initial
recognition and for an expansion or renewal of this recognition,
following requirements in Appendix A, 29 CFR 1910.7. This appendix
requires that the Agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides its preliminary finding. In the second notice,
the Agency provides its final decision on the application. These
notices set forth the NRTL's scope of recognition or modifications of
that scope. OSHA maintains an informational web page for each NRTL,
including CSA, which details the NRTL's scope of recognition. These
pages are available from the OSHA website at http://www.osha.gov/dts/otpca/nrtl/index.html.
CSA currently has seven facilities (sites) recognized by OSHA for
product testing and certification. Its headquarters location is
Canadian Standards Association, 178 Rexdale Boulevard, Etobicoke,
Ontario, M9W 1R3, Canada. A complete list of CSA's scope of recognition
is available at https://www.osha.gov/dts/otpca/nrtl/csa.html.
II. General Background on the Application
CSA submitted an application, dated May 23, 2017 (OSHA-2006-0042-
0010), to expand its recognition to include seven additional test
standards. OSHA staff performed detailed analysis of the application
packet and reviewed other pertinent information. OSHA did not perform
any on-site reviews in relation to this application.
Table 1 below lists the appropriate test standards found in CSA's
application for expansion for testing and certification of products
under the NRTL Program.
Table 1--Proposed List of Appropriate Test Standards for Inclusion in
CSA's NRTL Scope of Recognition
------------------------------------------------------------------------
Test Standard Test Standard Title
------------------------------------------------------------------------
UL 498A *......................... Current Taps and Adapters.
UL 508A........................... Standard for Industrial Control
Panels.
UL 60950-1........................ Information Technology Equipment--
Safety--Part 1: General
Requirements.
UL 60950-21....................... Information Technology Equipment--
Safety--Part 21: Remote Power
Feeding.
UL 60950-23....................... Information Technology Equipment--
Safety--Part 23: Large Data Storage
Equipment.
UL 61800-5-1...................... Standard for Adjustable Speed
Electrical Power Drive Systems Part
5-1: Safety Requirements--
Electrical, Thermal and Energy.
UL 62368-1........................ Audio/Video, Information and
Communication Technology Equipment--
Part 1: Safety Requirements.
------------------------------------------------------------------------
* Represents the standards that OSHA proposes to add to the NRTL
Program's List of Appropriate Test Standards
III. Proposal To Add New Test Standard to the NRTL Program's List of
Appropriate Test Standards
Periodically, OSHA will propose to add new test standards to the
NRTL list of appropriate test standards following an evaluation of the
test standard document. To qualify as an appropriate test standard, the
Agency evaluates the document to (1) verify it represents a product
category for which OSHA requires certification by a NRTL, (2) verify
the document represents an end product and not a component, and (3)
verify the document defines safety test specifications (not
installation or operational performance specifications).
In this notice, OSHA proposes to add one new test standard to the
NRTL Program's List of Appropriate Test Standards. Table 2, below,
lists the test standard that are new to the NRTL Program. OSHA
preliminarily determined that this test standard is an appropriate test
standard and proposes to include it in the NRTL Program's List of
Appropriate Test Standards. OSHA seeks public comment on this
preliminary determination.
Table 2--Test Standard OSHA Is Proposing To Add to the NRTL Program's
List of Appropriate Test Standards
------------------------------------------------------------------------
Test Standard Test Standard Title
------------------------------------------------------------------------
UL 498A................................ Current Taps and Adapters
------------------------------------------------------------------------
IV. Preliminary Findings on the Application
CSA submitted an acceptable application for expansion of its scope
of recognition. OSHA's review of the application file, and pertinent
documentation, indicate that CSA can meet the requirements prescribed
by 29 CFR 1910.7 for expanding its recognition to include the addition
of these seven test standards for NRTL testing and certification listed
above. This preliminary finding does not constitute an interim or
temporary approval of CSA's application.
OSHA welcomes public comment as to whether CSA meets the
requirements of 29 CFR 1910.7 for expansion of its recognition as a
NRTL. Comments should consist of pertinent written documents and
exhibits. Commenters needing more time to comment must submit a request
in writing, stating the reasons for the request. Commenters must submit
the written request for an extension by the due date for comments. OSHA
will limit any extension to 10 days unless the requester justifies a
longer period. OSHA may deny a request for an extension if the request
is not adequately justified. To obtain or review copies of the exhibits
identified in this notice, as well as comments submitted to the docket,
contact the Docket Office, at the above address. These materials also
are available online at http://www.regulations.gov under Docket No.
OSHA-2006-0042.
OSHA staff will review all comments to the docket submitted in a
timely manner and, after addressing the issues raised by these
comments, will recommend to the Assistant Secretary for Occupational
Safety and Health whether to grant CSA's application for expansion of
its scope of recognition. The Assistant Secretary will make the final
decision on granting the application. In making this decision, the
Assistant Secretary may undertake other
proceedings prescribed in Appendix A to 29 CFR 1910.7.
OSHA will publish a public notice of its final decision in the
Federal Register.
V. Authority and Signature
Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational
Safety and Health, authorized the preparation of this notice.
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on December 11, 2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-27122 Filed 12-15-17; 8:45 am]
BILLING CODE 4510-26-P
