[Federal Register Volume 84, Number 81 (Friday, April 26, 2019)]
[Notices]
[Pages 17892-17893]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-08433]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2009-0026]
Curtis-Strauss LLC: Grant of Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to expand
the scope of recognition for Curtis-Strauss LLC (CSL), as a Nationally
Recognized Testing Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
April 26, 2019.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor; telephone: (202) 693-1999;
email: meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor; telephone:
(202) 693-2110; email: robinson.kevin@dol.gov. OSHA's web page includes
information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of Curtis-Strauss LLC, as a NRTL. CSL's expansion covers
the addition of one test standard to its scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified by 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification of the products.
The agency processes applications by a NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides a preliminary finding and, in the second
notice, the agency provides the final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational web page
for each NRTL that details its scope of recognition. These pages are
available from the agency's website at http://www.osha.gov/dts/otpca/nrtl/index.html.
CSL submitted an application, dated January 2, 2018 (OSHA-2009-
0026-0079), to expand its recognition to include one additional test
standard. OSHA staff performed a detailed analysis of the application
packet and reviewed other pertinent information. OSHA did not perform
any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing CSL's expansion
application in the Federal Register on December 26, 2018 (83 FR 66311).
The agency requested comments by January 10, 2019, but received no
comments in response to this notice. OSHA now is proceeding with this
final notice to grant expansion of CSL's scope of recognition.
To obtain or review copies of all public documents pertaining to
CSL's application, go to http://www.regulations.gov or contact the
Docket Office, Occupational Safety and Health Administration, U.S.
Department of Labor, 200 Constitution Avenue NW, Room N-3653,
Washington, DC 20210. Docket No. OSHA-2009-0026 contains all materials
in the record concerning CSL's recognition.
II. Final Decision and Order
OSHA staff examined CSL's expansion application, the capability to
meet the requirements of the test standards, and other pertinent
information. Based on a review of this evidence, OSHA finds that CSL
meets the requirements of 29 CFR 1910.7 for expansion of the
recognition, subject to the specified limitation, and conditions
listed. OSHA, therefore, is proceeding with this final notice to grant
CSL's scope of recognition. OSHA limits the expansion of CSL's
recognition to testing and certification of products for demonstration
of conformance to the test standard listed, in Table 1.
Table 1--List of Appropriate Test Standard for Inclusion in CSL's NRTL
Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 962.................................... Household and Commercial
Furnishings.
------------------------------------------------------------------------
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, a
NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the
test standards listed above as American National Standards. However,
for convenience, the use of the designation of the standards-developing
organization for the standard as opposed to the ANSI designation may
occur. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3,
Appendix C, paragraph XIV), any NRTL
recognized for a particular test standard may use either the
proprietary version of the test standard or the ANSI version of that
standard. Contact ANSI to determine whether a test standard is
currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
CSL must abide by the following conditions of the recognition:
1. CSL must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as a NRTL, and provide details of the
change(s);
2. CSL must meet all the terms of its recognition and comply with
all OSHA policies pertaining to this recognition; and
3. CSL must continue to meet the requirements for recognition,
including all previously published conditions on CSL's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of CSL, subject to the limitation and conditions
specified above.
III. Authority and Signature
Loren Sweatt, Acting Assistant Secretary of Labor for Occupational
Safety and Health, authorized the preparation of this notice.
Accordingly, the agency is issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25,
2012), and 29 CFR 1910.7.
Signed at Washington, DC, on April 23, 2019.
Loren Sweatt,
Acting Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2019-08433 Filed 4-25-19; 8:45 am]
BILLING CODE 4510-26-P
