[Federal Register Volume 85, Number 57 (Tuesday, March 24, 2020)]
[Notices]
[Pages 16664-16673]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-06144]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2013-0012]
Modification to the List of Appropriate NRTL Program Test
Standards and the Scopes of Recognition of Several NRTLs
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to: (1) Add
one new test standard to the Nationally Recognized Testing Laboratories
(NRTL) Program's list of appropriate test standards; (2) delete or
replace several test standards from the NRTL Program's list of
appropriate test standards; and (3) update the scope of recognition of
several NRTLs.
DATES: The actions contained in this notice will become effective on
March 24, 2020.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications; telephone: (202) 693-1999; email:
meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration; telephone: (202) 693-2110 or email:
robinson.kevin@dol.gov. OSHA's web page includes information about the
NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Background
The NRTL Program recognizes organizations that provide product-
safety testing and certification services to manufacturers. These
organizations perform testing and certification for purposes of the
program, to U.S. consensus-based product-safety test standards. The
products covered by the NRTL Program consist of those items for which
OSHA safety standards require ``certification'' by a NRTL. The
requirements affect electrical products and 38 other types of products.
OSHA does not develop or issue these test standards, but generally
relies on standards development organizations (SDOs), which develop and
maintain the standards using a method that provides input and
consideration of views of industry groups, experts, users, consumers,
governmental authorities and others having broad experience in the
safety field involved.
Addition of New Test Standards to the NRTL List of Appropriate Test
Standards
Periodically, OSHA will add new test standards to the NRTL list of
appropriate test standards following an evaluation of the test standard
document. To qualify as an appropriate test standard, the agency
evaluates the document to (1) verify it represents a product category
for which OSHA requires certification by a NRTL, (2) verify the
document represents an end product and not a component, and (3) verify
the document defines safety test specifications (not installation or
operational performance specifications). OSHA becomes aware of new test
standards through various avenues. For example, OSHA may become aware
of new test standards by: (1) Monitoring notifications issued by
certain SDOs; (2) reviewing applications by NRTLs or applicants seeking
recognition to include a new test standard in their scopes of
recognition; and (3) obtaining notification from manufacturers,
manufacturing organizations, government agencies, or other parties that
a new test standard may be appropriate to add to the list of
appropriate standards. OSHA may determine to include a new test
standard in the list, for example, if the test standard is for a
particular type of product that another test standard also covers,
addresses a type of product that no standard previously covered, or is
otherwise new to the NRTL Program.
SDO Deletion and Replacement of Test Standards
The NRTL Program regulations require that appropriate test
standards be maintained and current (29 CFR 1910.7(c)). A test standard
withdrawn by a standards development organization is no longer
considered an appropriate test standard (CPL 01-00-004, NRTL Program
Policies, Procedures and Guidelines Directive, Chapter 2, IX). It is
OSHA's policy to remove recognition of withdrawn test standards by
issuing a correction notice in the Federal Register for all NRTLs
recognized for the withdrawn test standards. However, SDOs frequently
will designate a replacement standard for withdrawn standards. OSHA
will recognize a NRTL for an appropriate replacement test standard if
the NRTL has the requisite testing and evaluation capability for the
replacement test standard.
One method that NRTLs may use to show such capability involves an
analysis to determine whether any testing and evaluation requirements
of existing test standards in a NRTL's scope are comparable (i.e., are
completely or substantially identical) to the requirements in the
replacement test standard. If OSHA's analysis shows the replacement
test standard does not require additional or different technical
capability than an existing test standard(s), and the replacement test
standard is comparable to the existing test standard(s), then OSHA can
add the replacement test standard to affected NRTLs' scopes of
recognition. If OSHA's analysis shows the replacement test standard
requires an additional or different technical capability, or the
replacement test standard is not comparable to any existing test
standards, each affected NRTL seeking to have OSHA add the replacement
test standard to the NRTL's scope of recognition must provide
information to OSHA that demonstrates technical capability.
Other Reasons for Removal of Test Standards From the NRTL List of
Appropriate Test Standards
OSHA may choose to remove a test standard from the NRTL Program's
List of Appropriate Test Standards based on an internal review in which
NRTL Program staff review the NRTL Program's List of Appropriate Test
Standards to determine if the test standards conform to the definition
of an appropriate test standard defined in NRTL Program regulations and
policy. There are several reasons for removing a test standard based on
this review. First, a document that provides the methodology for a
single test is a test method rather than an appropriate test standard
(29 CFR 1910.7(c)). As stated above, a test standard must specify the
safety requirements for a specific type of product(s). A test method,
however, is a specified technical procedure for performing a test, as
such, a test method is not an appropriate test standard. While a NRTL
may use a test method to determine if certain safety requirements are
met, a test method is not itself a safety requirement for a specific
product category.
Second, a document that focuses primarily on usage, installation,
or maintenance requirements would also not be considered an appropriate
test standard (NRTL Program Policies, Procedures and Guidelines
Directive, CPL-01-00-004, Chapter 2, Section VIII, B). In some cases,
however, a document may also provide safety test specifications in
addition to usage, installation, and maintenance requirements. In such
cases, the document would be retained as an appropriate test standard
based on the safety test specifications.
Finally, a document may not be considered an appropriate test
standard if the document covers products for which OSHA does not
require testing and certification (NRTL Program Policies, Procedures
and Guidelines Directive, CPL-01-00-004, Chapter 2, Section VIII, B).
Similarly, a document that covers electrical product components would
not be considered an appropriate test standard. These documents apply
to types of components that have limitation(s) or condition(s) on their
use, which are not appropriate for use as end-use products. These
documents also specify that these types of components are for use only
as part of an end-use product. NRTLs, however, evaluate such components
only in the context of evaluating whether end-use products requiring
NRTL approval are safe for use in the workplace. Testing such
components alone would not indicate that the end-use products
containing the components are safe for use. Accordingly, as a matter of
policy, OSHA considers that documents covering such components are not
appropriate test standards under the NRTL Program. OSHA notes, however,
that it is not proposing to delete from NRTLs' scope of recognition any
test standards covering end-use products that contain such
components.\1\
---------------------------------------------------------------------------
\1\ OSHA notes also that some types of devices covered by these
documents, such as capacitors and transformers, may be end-use
products themselves, and tested under other test standards
applicable to such products. For example, the following test
standard covers transformers that are end-use products: UL 1562
Standard for Transformers, Distribution, Dry-Type--Over 600 Volts.
OSHA is not proposing to delete such test standards from NRTLs'
scopes of recognition.
---------------------------------------------------------------------------
In addition, OSHA notes that, to conform to a test standard
covering an end-use product, a NRTL must still determine that the
components in the product comply with the components' specific test
standards. In making this determination, NRTLs may test the components
themselves, or accept the testing of a qualified testing organization
that a given component conforms to the particular test standard. OSHA
reviews each NRTL's procedures to determine which approach the NRTL
will use to address components, and reviews the end-use product testing
to verify the NRTL appropriately addresses that product's components.
Proposed Modification to the List of Appropriate NRTL Program Test
Standards and the Scope of Recognition of Several NRTLs
In an April 10, 2019 Federal Register notice (84 FR 14412, referred
to in this notice as ``Proposed Modification,'' and available at
www.regulations.gov under Docket ID OSHA-2013-0012-0011), OSHA
proposed: Deleting several withdrawn and deleted test standards from
the NRTL Program's list of appropriate test standards; incorporating
into the NRTL Program's list of appropriate test standards replacement
test standards for some of the withdrawn and deleted test standards;
and updating the scope of recognition of several NRTLs. In response to
this notice, two comments (OSHA-2013-0012-0023) and (OSHA-2013-0012-
0024) were received from the public after the comment period ended. The
comments were not related to this Federal Register notice, and OSHA has
not made any modifications to this notice based on these comments.
OSHA further published a Federal Register notice regarding
insulating links on March 14, 2019 (84 FR 9384) and announced the final
decision on July 29, 2019 (84 FR 35887). This Federal Register notice
addressed the issue raised in the comments within 84 FR 14412.
Therefore the issue raised in the comments will not be addressed in
this notice.
II. Final Decision To Add a New Test Standard to the NRTL Program's
List of Appropriate Test Standards
In this notice, OSHA announces the final decision to add one test
standard, UL 61010-2-061, Electrical Equipment for Measurement, Control
and Laboratory Use--Part 2-061: Particular Requirements for Laboratory
Atomic Spectrometers with Thermal Atomization and Ionization to the
NRTL Program's list of appropriate test standards. In the Proposed
Modification, OSHA proposed replacing withdrawn standards with nine
standards, eight of which are already included in the NRTL Program's
list of appropriate test standards. The standard
OSHA will add to the NRTL Program's list of appropriate test standards
is outlined below in Table 1 below:
Table 1--Test Standard OSHA Is Adding to the NRTL Program's List of
Appropriate Test Standards
------------------------------------------------------------------------
Test standard No. Test standard title
------------------------------------------------------------------------
UL 61010-2-061.................... Electrical Equipment for
Measurement, Control and Laboratory
Use--Part 2-061: Particular
Requirements for Laboratory Atomic
Spectrometers with Thermal
Atomization and Ionization.
------------------------------------------------------------------------
II. Final Decision To Remove a Test Standard to the NRTL Program's List
of Appropriate Test Standards
In this notice, OSHA announces the final decision to delete twenty-
nine withdrawn and deleted test standards from the NRTL Program's List
of Appropriate Test Standards. OSHA also incorporates into the NRTL
Program's List of Appropriate Test Standards replacement test standards
for some of the withdrawn and deleted test standards as described below
in Table 2:
Table 2--Test Standards OSHA Is Removing From NRTL Program's List of Appropriate Test Standards
----------------------------------------------------------------------------------------------------------------
Replacement
Deleted test standard Test standard title Reason for deletion standard(s)
----------------------------------------------------------------------------------------------------------------
ANSI C37.44.................... Distribution Oil Withdrawn........................... None.
Cutouts and Fuse
Links.
IEEE C37.09.................... Standard Test Withdrawn........................... None.
Procedure for High-
Voltage Circuit
Breakers Rated on a
Symmetrical Current
Basis.
IEEE C37.29.................... Low-Voltage AC Power Withdrawn........................... None.
Circuit Protectors
Used in Enclosures.
IEEE C37.45.................... Distribution Withdrawn........................... None.
Enclosed Single-
Pole Air Switches.
NEMA C37.52.................... Low-Voltage AC Power Withdrawn........................... None.
Circuit Protectors
Used in Enclosures--
Test Procedures.
IEEE C37.53.................... High-Voltage Current Withdrawn........................... None.
Motor-Starter
Fuses--Conformance
Test Procedures.
ISA 82.02.01................... Electric and Withdrawn........................... None.
Electronic Test,
Measuring,
Controlling and
Related Equipment:
General Requirement.
UL 1093........................ Halogenated Agent Withdrawn........................... None.
Fire Extinguishers.
UL 1244........................ Electrical and Withdrawn........................... None.
Electronic
Measuring and
Testing Equipment.
UL 1448........................ Electric Hedge Withdrawn and replaced.............. UL 60745-2-15
Trimmers. Particular
Requirements for
Hedge Trimmers.
ISA 60079-2.................... Explosive Withdrawn and replaced.............. UL 60079-2
Atmospheres--Part Explosive
2: Equipment Atmospheres--Part
Protection by 2: Protection by
Pressurized Pressurized
Enclosures ``p''. Enclosures ``p''.
ISA 60079-5.................... Explosive Withdrawn and replaced.............. UL 60079-5
Atmospheres--Part Explosive
5: Equipment Atmospheres--Part
Protection by 5: Equipment
Powder Filling Protection by
``q''. Powder Filling
``q''.
ISA 60079-18................... Explosive Withdrawn and replaced.............. UL 60079-18
Atmospheres--Part Explosive
18: Equipment Atmospheres--Part
Protection by 18: Equipment
Encapsulation ``m''. Protection by
Encapsulation
``m''.
ISA 60079-26................... Explosive Withdrawn and replaced.............. UL 60079-26
Atmospheres--Part Explosive
26: Equipment for Atmospheres--Part
Use in Class I, 26: Equipment for
Zone 0 Hazardous Use in Class I,
(Classified) Zone 0 Hazardous
Locations. (Classified)
Locations.
UL 745-1....................... Portable Electric Withdrawn........................... None.
Tools.
UL 745-2....................... Particular Withdrawn........................... None.
Requirements of
Drills.
UL 745-2-3..................... Particular Withdrawn........................... None.
Requirements for
Grinders, Polishers
and Disk-Type
Sanders.
UL 745-2-17.................... Particular Withdrawn........................... None.
Requirements for
Circular Saws and
Circular Knives.
UL 745-2-36.................... Particular Withdrawn........................... None.
Requirements for
Hand Motor Tools.
UL 745-2-37.................... Particular Withdrawn........................... None.
Requirements for
Plate Jointers.
UL 61010A-1.................... Electrical Equipment Withdrawn and replaced.............. UL 61010-1
for Laboratory Use; Electrical
Part 1: General Equipment for
Requirements. Measurement,
Control and
Laboratory Use;
Part 1: General
Requirements.
UL 61010A-2-010................ Electrical Equipment Withdrawn and replaced.............. UL 61010-2-010
for Laboratory Use; Electrical
Part 2: Particular Equipment for
Requirements for Measurement,
the Heating of Control and
Materials. Laboratory Use--
Part 2-010:
Particular
Requirements for
Laboratory
Equipment for the
Heating of
Materials.
UL 61010A-2-020................ Electrical Equipment Withdrawn and replaced.............. UL 61010-2-020
for Laboratory Use; Electrical
Part 2: Particular Equipment for
Requirements for Measurement,
Laboratory Control, and
Centrifuges. Laboratory Use--
Part 2-020:
Particular
Requirements for
Laboratory
Centrifuges.
UL 61010A-2-041................ Electrical Equipment Withdrawn and replaced.............. UL 61010-1 (no
for Laboratory Use: direct
Part 2: Particular replacement).
Requirements for
Autoclaves Using
Steam for the
Treatment of
Medical Materials
for Laboratory
Purposes.
UL 61010A-2-051................ Electrical Equipment Withdrawn and replaced.............. UL 61010-2-051
for Laboratory Use; Electrical
Part 2: Particular Equipment for
Requirements for Measurement,
Laboratory Control and
Equipment Mixing Laboratory Use--
and Stirring. Part 2-051:
Particular
Requirements for
Laboratory
Equipment for
Mixing and
Stirring.
UL 61010A-2-061................ Electrical Equipment Withdrawn and replaced.............. UL 61010-2-061
for Laboratory Use: Electrical
Part 2: Particular Equipment for
Requirements for Measurement,
Laboratory Atomic Control and
Spectrometers with Laboratory Use--
Thermal Atomization Part 2-061:
and Ionization. Particular
Requirements for
Laboratory Atomic
Spectrometers with
Thermal
Atomization and
Ionization.
UL 61010B-1.................... Electrical Measuring Withdrawn and replaced.............. UL 61010-1
and Test Equipment; Electrical
Part 1: General Equipment for
Requirements. Measurement,
Control and
Laboratory Use;
Part 1: General
Requirements.
UL 61010B-2-031................ Electrical Equipment Withdrawn and replaced.............. UL 61010-1 (no
for Measurement, direct
Control and replacement).
Laboratory Use:
Part 2: Particular
Requirements for
Hand-Held Probe
Assemblies for
Electrical
Measurement and
Test.
UL 61010C-1.................... Process Control Withdrawn and replaced.............. UL 61010-1
Equipment. Electrical
Equipment for
Measurement,
Control and
Laboratory Use;
Part 1: General
Requirements.
----------------------------------------------------------------------------------------------------------------
III. Final Decision To Modify Affected NRTLs' Scope of Recognition
In this notice, OSHA announces the final decision to update the
scope of recognition of several NRTLs. The tables in this section
(Table 3 thru Table 10) list, for each affected NRTL, the test
standard(s) that OSHA will delete from the scope of recognition and,
when applicable, the test standard(s) that OSHA will incorporate into
the scope of recognition to replace withdrawn (and deleted) test
standards.
Table 3--Test Standards OSHA Is Removing From the Scope of Recognition
of the Canadian Standards Association
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical Standard UL 61010-2-020--
Equipment for Laboratory Use; withdrawn by Standard for Safety
Part 2: Particular Standards Requirements for
Requirements for Laboratory Organization. Electrical Equipment
Equipment for Laboratory for Laboratory Use;
Centrifuges. Part 2-020:
Particular
Requirements for
Laboratory Equipment
for Laboratory
Centrifuges.
IEEE C37.09 Standard Test Withdrawn........ None.
Procedure for AC High-Voltage
Circuit Breakers Rated on a
Symmetrical Current Basis.
IEEE C37.29 Low-Voltage AC Withdrawn........ None.
Power Circuit Protectors Used
in Enclosures.
IEEE C37.45 Distribution Withdrawn........ None.
Enclosed Single-Pole Air
Switches.
NEMA C37.52 Low-Voltage AC Withdrawn........ None.
Power Circuit Protectors Used
in Enclosures--Test
Procedures.
ISA 82.02.01 Electric and Withdrawn........ None.
Electronic Test, Measuring,
Controlling and Related
Equipment: General
Requirement.
UL 1244....................... Withdrawn........ None.
UL 1448....................... Withdrawn and UL 60745-2-15
Replaced. Particular
Requirements for
Hedge Trimmers.
ISA 60079-2 Explosive Withdrawn and UL 60079-2 Explosive
Atmospheres--Part 2: replaced. Atmospheres--Part 2:
Equipment Protection by Equipment Protection
Pressurized Enclosures ``p''. by Pressurized
Enclosures ``p''.
ISA 60079-5 Explosive Withdrawn and UL 60079-5 Explosive
Atmospheres--Part 5: replaced. Atmospheres--Part 5:
Equipment Protection by Power Equipment Protection
Filling ``q''. by Powder Filling
``q''.
ISA 60079-18 Explosive Withdrawn and UL 60079-18 Explosive
Atmospheres--Part 18: replaced. Atmospheres--Part
Equipment Protection by 18: Equipment
Encapsulation ``m''. Protection by
Encapsulation ``m''.
ISA 60079-26 Explosive Withdrawn and UL 60079-26 Explosive
Atmospheres--Part 26: replaced. Atmospheres--Part
Equipment for Use in Class I, 26: Equipment for
Zone 0 Hazardous (Classified) Use in Class I, Zone
Locations. 0 Hazardous
(Classified)
Locations.
UL 745-1 Portable Electric Withdrawn........ None.
Tools.
UL 745-2-1 Particular Withdrawn........ None.
Requirements of Drills.
UL 745-2-5 Particular Withdrawn........ None.
Requirements for Circular
Saws and Circular Knives.
UL 745-2-17 Particular Withdrawn........ None.
Requirements for Routers and
Trimmers.
UL 745-2-36 Particular Withdrawn........ None.
Requirements for Hand Motor
Tools.
UL 745-2-37 Particular Withdrawn........ None.
Requirements for Plate
Jointers.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010A-2-010 Electrical Withdrawn and UL 61010-2-010
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for the Heating Control and
of Materials. Laboratory Use--Part
2-010: Particular
Requirements for
Laboratory Equipment
for the Heating of
Materials.
UL 61010A-2-020 Electrical Withdrawn and UL 61010-2-020
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control, and
Centrifuges. Laboratory Use--Part
2-020: Particular
Requirements for
Laboratory
Centrifuges.
UL 61010A-2-041 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Laboratory Use: replaced. replacement).
Part 2: Particular
Requirements for Autoclaves
Using Steam for the Treatment
of Medical Materials for
Laboratory Purposes.
UL 61010A-2-051 Electrical Withdrawn and UL 61010-2-051
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Equipment Mixing and Stirring. Laboratory Use--Part
2-051: Particular
Requirements for
Laboratory Equipment
for Mixing and
Stirring.
UL 61010A-2-061 Electrical Withdrawn and UL 61010-2-061
Equipment for Laboratory Use: replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Atomic Spectrometers with Laboratory Use--Part
Thermal Atomization and 2-061: Particular
Ionization. Requirements for
Laboratory Atomic
Spectrometers with
Thermal Atomization
and Ionization.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-2-031 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Measurement, replaced. replacement).
Control and Laboratory Use:
Part 2: Particular
Requirements for Hand-Held
Probe Assemblies for
Electrical Measurement and
Test.
UL 61010C-1 Process Control Withdrawn and UL 61010-1 Electrical
Equipment. replaced. Equipment for
Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
Table 4--Test Standards OSHA Is Removing From the Scope of Recognition
of FM Approvals LLC
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 1093....................... Withdrawn........ None.
ISA 82.02.01 Electric and Withdrawn........ None.
Electronic Test, Measuring,
Controlling and Related
Equipment: General
Requirement.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
Table 5--Test Standards OSHA Is Removing From the Scope of Recognition
of Intertek Testing Services, NA
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical Standard UL 61010-2-020--
Equipment for Laboratory Use; withdrawn by Standard for Safety
Part 2: Particular Standards Requirements for
Requirements for Laboratory Organization. Electrical Equipment
Equipment for Laboratory for Laboratory Use;
Centrifuges. Part 2-020:
Particular
Requirements for
Laboratory
Centrifuges.
IEEE C37.29 Low-Voltage AC Withdrawn........ None.
Power Circuit Protectors Used
in Enclosures.
ISA 82.02.01 Electric and Withdrawn........ None.
Electronic Test, Measuring,
Controlling and Related
Equipment: General
Requirement.
UL 1093 Halogenated Agent Fire Withdrawn........ None.
Extinguishers.
UL 1244 Electrical and Withdrawn........ None.
Electronic Measuring and
Testing Equipment.
UL 1448 Electric Hedge Withdrawn and UL 60745-2-15
Trimmers. Replaced. Particular
Requirements for
Hedge Trimmers.
ISA 60079-2 Explosive Withdrawn and UL 60079-2 Explosive
Atmospheres--Part 2: replaced. Atmospheres--Part 2:
Equipment Protection by Equipment Protection
Pressurized Enclosures ``p''. by Pressurized
Enclosures ``p.''
ISA 60079-5 Explosive Withdrawn and UL 60079-5 Explosive
Atmospheres--Part 5: replaced. Atmospheres--Part 5:
Equipment Protection by Power Equipment Protection
Filling ``q''. by Powder Filling
``q.''
ISA 60079-18 Explosive Withdrawn and UL 60079-18 Explosive
Atmospheres--Part 18: replaced. Atmospheres--Part
Equipment Protection by 18: Equipment
Encapsulation ``m''. Protection by
Encapsulation ``m.''
ISA 60079-26 Explosive Withdrawn and UL 60079-26 Explosive
Atmospheres--Part 26: replaced. Atmospheres--Part
Equipment for Use in Class I, 26: Equipment for
Zone 0 Hazardous (Classified) Use in Class I, Zone
Locations. 0 Hazardous
(Classified)
Locations.
UL 745-1 Portable Electric Withdrawn........ None.
Tools.
UL 745-2-1 Particular Withdrawn........ None.
Requirements of Drills.
UL 745-2-5 Particular Withdrawn........ None.
Requirements for Circular
Saws and Circular Knives.
UL 745-2-17 Particular Withdrawn........ None.
Requirements for Routers and
Trimmers.
UL 745-2-36 Particular Withdrawn........ None.
Requirements for Hand Motor
Tools.
UL 745-2-37 Particular Withdrawn........ None.
Requirements for Plate
Jointers.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010A-2-010 Electrical Withdrawn and UL 61010-2-010
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for the Heating Control and
of Materials. Laboratory Use--Part
2-010: Particular
Requirements for
Laboratory Equipment
for the Heating of
Materials.
UL 61010A-2-020 Electrical Withdrawn and UL 61010-2-020
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control, and
Centrifuges. Laboratory Use--Part
2-020: Particular
Requirements for
Laboratory
Centrifuges.
UL 61010A-2-041 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Laboratory Use: replaced. replacement).
Part 2: Particular
Requirements for Autoclaves
Using Steam for the Treatment
of Medical Materials for
Laboratory Purposes.
UL 61010A-2-051 Electrical Withdrawn and UL 61010-2-051
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Equipment Mixing and Stirring. Laboratory Use--Part
2-051: Particular
Requirements for
Laboratory Equipment
for Mixing and
Stirring.
UL 61010A-2-061 Electrical Withdrawn and UL 61010-2-061
Equipment for Laboratory Use: replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Atomic Spectrometers with Laboratory Use--Part
Thermal Atomization and 2-061: Particular
Ionization. Requirements for
Laboratory Atomic
Spectrometers with
Thermal Atomization
and Ionization.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-2-031 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Measurement, replaced. replacement).
Control and Laboratory Use:
Part 2: Particular
Requirements for Hand-Held
Probe Assemblies for
Electrical Measurement and
Test.
UL 61010C-1 Process Control Withdrawn and UL 61010-1 Electrical
Equipment. replaced. Equipment for
Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
Table 6--Test Standards OSHA Is Removing From the Scope of Recognition
of MET Laboratories, Inc.
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 1448 Electric Edge Trimmers Withdrawn and UL 60745-2-15
Replaced. Particular
Requirements for
Hedge Trimmers.
UL 1244 Electrical and Withdrawn........ None.
Electronic Measuring and
Testing Equipment.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010C-1 Process Control Withdrawn and UL 61010-1 Electrical
Equipment. replaced. Equipment for
Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
Table 7--Test Standards OSHA Is Removing From the Scope of Recognition
of TUV Rheinland of North America, Inc.
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 1448....................... Withdrawn and UL 60745-2-15
replaced. Particular
Requirements for
Hedge Trimmers.
UL 745-1 Portable Electric Withdrawn........ None.
Tools.
UL 745-2-1 Particular Withdrawn........ None.
Requirements of Drills.
UL 745-2-5 Particular Withdrawn........ None.
Requirements for Circular
Saws and Circular Knives.
UL 745-2-17 Particular Withdrawn........ None.
Requirements for Routers and
Trimmers.
UL 745-2-36 Particular Withdrawn........ None.
Requirements for Hand Motor
Tools.
UL 745-2-37 Particular Withdrawn........ None.
Requirements for Plate
Jointers.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010C-1 Process Control Withdrawn and UL 61010-1 Electrical
Equipment. replaced. Equipment for
Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
Table 8--Test Standards OSHA Is Removing From the Scope of Recognition
of TUV SUD America, Inc.
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical Standard UL 61010-2-020--
Equipment for Laboratory Use; withdrawn by Standard for Safety
Part 2: Particular Standards Requirements for
Requirements for Laboratory Organization. Electrical Equipment
Equipment for Laboratory for Laboratory Use;
Centrifuges. Part 2-020:
Particular
Requirements for
Laboratory
Centrifuges.
UL 1448....................... Withdrawn and UL 60745-2-15
replaced. Particular
Requirements for
Hedge Trimmers.
UL 745-1 Portable Electric Withdrawn........ None.
Tools.
UL 745-2-1 Particular Withdrawn........ None.
Requirements of Drills.
UL 745-2-5 Particular Withdrawn........ None.
Requirements for Circular
Saws and Circular Knives.
UL 745-2-17 Particular Withdrawn........ None.
Requirements for Routers and
Trimmers.
UL 745-2-36 Particular Withdrawn........ None.
Requirements for Hand Motor
Tools.
UL 745-2-37 Particular Withdrawn........ None.
Requirements for Plate
Jointers.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010A-2-010 Electrical Withdrawn and UL 61010-2-010.
Equipment for Laboratory Use; replaced.
Part 2: Particular
Requirements for the Heating
of Materials.
UL 61010A-2-020 Electrical Withdrawn and UL 61010-2-010
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Centrifuges. Laboratory Use--Part
2-010: Particular
Requirements for
Laboratory Equipment
for the Heating of
Materials.
UL 61010A-2-041 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Laboratory Use: replaced. replacement).
Part 2: Particular
Requirements for Autoclaves
Using Steam for the Treatment
of Medical Materials for
Laboratory Purposes.
UL 61010A-2-051 Electrical Withdrawn and UL 61010-2-051
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Equipment Mixing and Stirring. Laboratory Use--Part
2-051: Particular
Requirements for
Laboratory Equipment
for Mixing and
Stirring.
UL 61010A-2-061 Electrical Withdrawn and UL 61010-2-061
Equipment for Laboratory Use: replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Atomic Spectrometers with Laboratory Use--Part
Thermal Atomization and 2-061: Particular
Ionization. Requirements for
Laboratory Atomic
Spectrometers with
Thermal Atomization
and Ionization.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-2-031 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Measurement, replaced. replacement).
Control and Laboratory Use:
Part 2: Particular
Requirements for Hand-Held
Probe Assemblies for
Electrical Measurement and
Test.
------------------------------------------------------------------------
Table 9--Test Standards OSHA Is Removing From the Scope of Recognition
of TUVPSG, Inc.
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 745-1 Portable Electric Withdrawn........ None.
Tools.
UL 745-2-1 Particular Withdrawn........ None.
Requirements of Drills.
UL 745-2-5 Particular Withdrawn........ None.
Requirements for Circular
Saws and Circular Knives.
UL 745-2-17 Particular Withdrawn........ None.
Requirements for Routers and
Trimmers.
UL 745-2-36 Particular Withdrawn........ None.
Requirements for Hand Motor
Tools.
UL 745-2-37 Particular Withdrawn........ None.
Requirements for Plate
Jointers.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010A-2-010 Electrical Withdrawn and UL 61010-2-010
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for the Heating Control and
of Materials. Laboratory Use--Part
2-010: Particular
Requirements for
Laboratory Equipment
for the Heating of
Materials.
UL 61010A-2-020 Electrical Withdrawn and UL 61010-2-020
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control, and
Centrifuges. Laboratory Use--Part
2-020: Particular
Requirements for
Laboratory
Centrifuges.
UL 61010A-2-041 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Laboratory Use: replaced. replacement).
Part 2: Particular
Requirements for Autoclaves
Using Steam for the Treatment
of Medical Materials for
Laboratory Purposes.
UL 61010A-2-051 Electrical Withdrawn and UL 61010-2-051
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Equipment Mixing and Stirring. Laboratory Use--Part
2-051: Particular
Requirements for
Laboratory Equipment
for Mixing and
Stirring.
UL 61010A-2-061 Electrical Withdrawn and UL 61010-2-061
Equipment for Laboratory Use: replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Atomic Spectrometers with Laboratory Use--Part
Thermal Atomization and 2-061: Particular
Ionization. Requirements for
Laboratory Atomic
Spectrometers with
Thermal Atomization
and Ionization.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
Table 10--Test Standards OSHA Is Removing From the Scope of Recognition
of Underwriters Laboratory, Inc.
------------------------------------------------------------------------
Replacement test
Test standard(s) being removed Reason for standard(s) (if
removal applicable)
------------------------------------------------------------------------
UL 61010A-2-020--Electrical Standard UL 61010-2-020--
Equipment for Laboratory Use; withdrawn by Standard for Safety
Part 2: Particular Standards Requirements for
Requirements for Laboratory Organization. Electrical Equipment
Equipment for Laboratory for Laboratory Use;
Centrifuges. Part 2-020:
Particular
Requirements for
Laboratory
Centrifuges.
ANSI C37.44 Distribution Oil Withdrawn........ None.
Cutouts and Fuse Links.
IEEE C37.29 Low-Voltage AC Withdrawn........ None.
Power Circuit Protectors Used
in Enclosures.
IEEE C37.45 Distribution Withdrawn........ None.
Enclosed Single-Pole Air
Switches.
IEEE C37.52 Low-Voltage AC Withdrawn........ None.
Power Circuit Protectors Used
in Enclosures--Test
Procedures.
UL 1093 Halogenated Agent Fire Withdrawn........ None.
Extinguishers.
UL 1244 Electrical and Withdrawn........ None.
Electronic Measuring and
Testing Equipment.
UL 1448 Electric Hedge Withdrawn and UL 60745-2-15
Trimmers. replaced. Particular
Requirements for
Hedge Trimmers.
ISA 60079-2 Explosive Withdrawn and UL 60079-2 Explosive
Atmospheres--Part 2: replaced. Atmospheres--Part 2:
Equipment Protection by Protection by
Pressurized Enclosures ``p''. Pressurized
Enclosures ``p''.
ISA 60079-5 Explosive Withdrawn and UL 60079-5 Explosive
Atmospheres--Part 5: replaced. Atmospheres--Part 5:
Equipment Protection by Power Equipment Protection
Filling ``q''. by Powder Filling
``q''.
ISA 60079-18 Explosive Withdrawn and UL 60079-18 Explosive
Atmospheres--Part 18: replaced. Atmospheres--Part
Equipment Protection by 18: Equipment
Encapsulation ``m''. Protection by
Encapsulation ``m''.
ISA 60079-26 Explosive Withdrawn and UL 60079-26 Explosive
Atmospheres--Part 26: replaced. Atmospheres--Part
Equipment for Use in Class I, 26: Equipment for
Zone 0 Hazardous (Classified) Use in Class I, Zone
Locations. 0 Hazardous
(Classified)
Locations.
UL 745-1 Portable Electric Withdrawn........ None.
Tools.
UL 745-2-1 Particular Withdrawn........ None.
Requirements of Drills.
UL 745-2-5 Particular Withdrawn........ None.
Requirements for Circular
Saws and Circular Knives.
UL 745-2-17 Particular Withdrawn........ None.
Requirements for Routers and
Trimmers.
UL 745-2-36 Particular Withdrawn........ None.
Requirements for Hand Motor
Tools.
UL 745-2-37 Particular Withdrawn........ None.
Requirements for Plate
Jointers.
UL 61010A-1 Electrical Withdrawn and UL 61010-1 Electrical
Equipment for Laboratory Use; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010A-2-010 Electrical Withdrawn and UL 61010-2-010
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for the Heating Control and
of Materials. Laboratory Use--Part
2-010: Particular
Requirements for
Laboratory Equipment
for the Heating of
Materials.
UL 61010A-2-020 Electrical Withdrawn and UL 61010-2-020
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control, and
Centrifuges. Laboratory Use--Part
2-020: Particular
Requirements for
Laboratory
Centrifuges.
UL 61010A-2-041 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Laboratory Use: replaced. replacement).
Part 2: Particular
Requirements for Autoclaves
Using Steam for the Treatment
of Medical Materials for
Laboratory Purposes.
UL 61010A-2-051 Electrical Withdrawn and UL 61010-2-051
Equipment for Laboratory Use; replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Equipment Mixing and Stirring. Laboratory Use--Part
2-051: Particular
Requirements for
Laboratory Equipment
for Mixing and
Stirring.
UL 61010A-2-061 Electrical Withdrawn and UL 61010-2-061
Equipment for Laboratory Use: replaced. Electrical Equipment
Part 2: Particular for Measurement,
Requirements for Laboratory Control and
Atomic Spectrometers with Laboratory Use--Part
Thermal Atomization and 2-061: Particular
Ionization. Requirements for
Laboratory Atomic
Spectrometers with
Thermal Atomization
and Ionization.
UL 61010B-1 Electrical Withdrawn and UL 61010-1 Electrical
Measuring and Test Equipment; replaced. Equipment for
Part 1: General Requirements. Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
UL 61010B-2-031 Electrical Withdrawn and UL 61010-1 (no direct
Equipment for Measurement, replaced. replacement).
Control and Laboratory Use:
Part 2: Particular
Requirements for Hand-Held
Probe Assemblies for
Electrical Measurement and
Test.
UL 61010C-1 Process Control Withdrawn and UL 61010-1 Electrical
Equipment. replaced. Equipment for
Measurement, Control
and Laboratory Use;
Part 1: General
Requirements.
------------------------------------------------------------------------
OSHA will place on its informational web pages the modifications to
each NRTL's scope of recognition. These web pages detail the scope of
recognition for each NRTL, including the test standards the NRTL may
use to test and certify products under OSHA's NRTL Program. OSHA also
will add to the list of ``Appropriate Test Standards'' web page, those
test standards added to the NRTL Program's List of Appropriate Test
Standards. The agency will add to the ``Standards No Longer
Recognized'' web page those test standards that OSHA no longer
recognizes or permits under the NRTL Program. Access to these web pages
is available at http://www.osha.gov/dts/otpca/nrtl/index.html.
IV. Authority and Signature
Loren Sweatt, Principal Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to 29
U.S.C. 657(g)(2)), Secretary of Labor's Order No. 1-2012 (77 FR 3912,
Jan. 25, 2012), and 29 CFR 1910.7.
Signed at Washington, DC, on March 19, 2020.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety
and Health.
[FR Doc. 2020-06144 Filed 3-23-20; 8:45 am]
BILLING CODE 4510-26-P
