[Federal Register Volume 87, Number 31 (Tuesday, February 15, 2022)]
[Notices]
[Pages 8612-8614]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-03194]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2006-0028]
MET Laboratories, Inc.: Application for Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the application of MET
Laboratories, Inc., for expansion of its recognition as a Nationally
Recognized Testing Laboratory (NRTL) and presents the agency's
preliminary finding to grant the application.
DATES: Submit comments, information, and documents in response to this
notice, or requests for an extension of time to make a submission, on
or before March 2, 2022.
ADDRESSES: Submit comments by any of the following methods:
Electronically: Submit comments and attachments electronically at
https://www.regulations.gov, which is the Federal eRulemaking Portal.
Follow the
instructions online for making electronic submissions.
Docket: To read or download submissions or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the above address. All documents in the docket are listed in the
https://www.regulations.gov index; however, some information (e.g.,
copyrighted material) is not publicly available to read or download
through the website. All submissions, including copyrighted material,
are available for inspection at the OSHA Docket Office. Contact the
OSHA Docket Office at (202) 693-2350 (TTY (877) 889-5627) for
assistance in locating docket submissions.
Instructions: All submissions must include the agency name and the
OSHA docket number (OSHA-2006-0028). OSHA places comments and other
materials, including any personal information, in the public docket
without revision, and these materials will be available online at
https://www.regulations.gov. Therefore, the agency cautions commenters
about submitting statements they do not want made available to the
public, or submitting comments that contain personal information
(either about themselves or others) such as Social Security numbers,
birth dates, and medical data. For further information on submitting
comments, see the ``Public Participation'' heading in the section of
this notice titled SUPPLEMENTARY INFORMATION.
Extension of comment period: Submit requests for an extension of
the comment period on or before March 2, 2022 to the Office of
Technical Programs and Coordination Activities, Directorate of
Technical Support and Emergency Management, Occupational Safety and
Health Administration, U.S. Department of Labor, by fax to (202) 693-
1644.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, phone: (202) 693-1999 or email:
meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, phone: (202) 693-2110 or email:
robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of the Application for Expansion
The Occupational Safety and Health Administration is providing
notice that MET Laboratories, Inc. (MET), is applying for expansion of
its current recognition as a NRTL. MET requests the addition of
seventeen test standards to its NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within its
scope of recognition. Each NRTL's scope of recognition includes (1) the
type of products the NRTL may test, with each type specified by its
applicable test standard; and (2) the recognized site(s) that has/have
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope.
Recognition is not a delegation or grant of government authority;
however, recognition enables employers to use products approved by the
NRTL to meet OSHA standards that require product testing and
certification.
The agency processes applications by a NRTL for initial recognition
and for an expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides a preliminary finding. In the second notice,
the agency provides a final decision on the application. These notices
set forth the NRTL's scope of recognition or modifications of that
scope. OSHA maintains an informational web page for each NRTL,
including MET, which details the NRTL's scope of recognition. These
pages are available from the OSHA website at https://www.osha.gov/dts/otpca/nrtl/index.html.
MET currently has one facility (site) recognized by OSHA for
product testing and certification, with its headquarters located at:
MET Laboratories, Inc., 914 West Patapsco Avenue, Baltimore, Maryland
21230. A complete list of MET's scope of recognition is available at
https://www.osha.gov/dts/otpca/nrtl/met.html.
II. General Background on the Application
MET submitted an application to expand its NRTL recognition on
April 20, 2020 (OSHA-2006-0028-0082). The expansion application would
add seventeen additional test standards to MET's NRTL scope of
recognition. OSHA staff performed a detailed analysis of the
application packet and reviewed other pertinent information. OSHA did
not perform any on-site reviews in relation to this application.
Table 1, below, lists the appropriate test standards found in MET's
application for expansion for testing and certification of products
under the NRTL Program.
Table 1--Proposed Appropriate Test Standards for Inclusion in MET's NRTL
Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 62841-1................ Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden
Machinery--Safety--Part 1: General
Requirements.
UL 62841-2-2.............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden
Machinery--Safety--Part 2-2: Particular
Requirements For Hand-Held Screwdrivers and
Impact Wrenches.
UL 62841-2-4.............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden
Machinery--Safety--Part 2-4: Particular
Requirements For Hand-Held Sanders And
Polishers Other.
UL 62841-2-5.............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools And Lawn And Garden
Machinery--Safety--Part 2-5: Particular
Requirements for Hand-Held Circular Saws.
UL 62841-2-8.............. Safety Requirements for Particular
Requirements for Hand-Held Shears and
Nibblers.
UL 62841-2-9.............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools And Lawn and Garden
Machinery--Safety--Part 2-9: Particular
Requirements for Hand-Held Tappers and
Threaders.
UL 62841-2-10............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools And Lawn And Garden
Machinery--Part 2-10: Particular
Requirements for Hand-Held Mixers.
UL 62841-2-11............. Safety Requirements for Particular
Requirements for Hand-Held Reciprocating
Saws.
UL 62841-2-14............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn And Garden
Machinery--Safety--Part 2-14: Particular
Requirements for Hand-Held Planers.
UL 62841-2-17............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden
Machinery--Safety--Part 2-17: Particular
Requirements for Hand-Held Routers.
UL 62841-2-21............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools And Lawn And Garden
Machinery--Part 2-21: Particular
Requirements for Hand-Held Drain Cleaners.
UL 62841-3-1.............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden
Machinery--Safety--Part 3-1: Particular
Requirements For Transportable Table Saws.
UL 62841-3-4.............. Safety Requirements for Particular
Requirements for Transportable Bench
Grinders.
UL 62841-3-6.............. Safety Requirements for Particular
Requirements for Transportable Diamond
Drills with Liquid System.
UL 62841-3-9.............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden
Machinery--Safety--Part 3-9: Particular
Requirements for Transportable Mitre Saws.
UL 62841-3-13............. Electric Motor-Operated Hand-Held Tools,
Transportable Tools And Lawn And Garden
Machinery--Part 3-13: Particular
Requirements for Transportable Drills.
UL 62841-4-2.............. Standard for Electric Motor-Operated Hand-
Held Tools, Transportable Tools and Lawn
And Garden Machinery--Safety--Part 4-2:
Particular Requirements for Hedge Trimmers.
------------------------------------------------------------------------
III. Preliminary Findings on the Application
MET submitted an acceptable application for expansion of its scope
of recognition. OSHA's review of the application file, and pertinent
documentation, indicate that MET can meet the requirements prescribed
by 29 CFR 1910.7 for expanding its recognition to include the addition
of these seventeen test standards for NRTL testing and certification
listed in Table 1. This preliminary finding does not constitute an
interim or temporary approval of MET's application.
OSHA welcomes public comment as to whether MET meets the
requirements of 29 CFR 1910.7 for expansion of its recognition as a
NRTL. Comments should consist of pertinent written documents and
exhibits. Commenters needing more time to comment must submit a request
in writing, stating the reasons for the request. Commenters must submit
the written request for an extension by the due date for comments. OSHA
will limit any extension to 10 days unless the requester justifies a
longer period. OSHA may deny a request for an extension if the request
is not adequately justified. To obtain or review copies of the exhibits
identified in this notice, as well as comments submitted to the docket,
contact the Docket Office, at the above address. These materials also
are available online at https://www.regulations.gov under Docket No.
OSHA-2006-0028.
OSHA staff will review all comments to the docket submitted in a
timely manner and, after addressing the issues raised by these
comments, will make a recommendation to the Assistant Secretary for
Occupational Safety and Health whether to grant MET's application for
expansion of its scope of recognition. The Assistant Secretary will
make the final decision on granting the application. In making this
decision, the Assistant Secretary may undertake other proceedings
prescribed in Appendix A to 29 CFR 1910.7.
OSHA will publish a public notice of its final decision in the
Federal Register.
IV. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to
Section 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85
FR 58393; Sept. 18, 2020), and 29 CFR 1910.7.
Signed at Washington, DC, on January 25, 2022.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-03194 Filed 2-14-22; 8:45 am]
BILLING CODE 4510-26-P
