[Federal Register Volume 87, Number 216 (Wednesday, November 9, 2022)]
[Notices]
[Pages 67717-67718]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-24445]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0037]
Standard for Welding, Cutting, and Brazing; Extension of the
Office of Management and Budget's (OMB) Approval of Information
Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning the proposal to
extend the Office of Management and Budget's (OMB) approval of the
information collection requirements specified in the Standard for
Welding, Cutting, and Brazing.
DATES: Comments must be submitted (postmarked, sent, or received) by
January 9, 2023.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Docket: To read or download comments or other material in the
docket, go to http://www.regulations.gov. Documents in the docket are
listed in the http://www.regulations.gov index; however, some
information (e.g., copyrighted material) is not publicly available to
read or download through the website. All submissions, including
copyrighted material, are available for inspection through the OSHA
Docket Office. Contact the OSHA Docket Office at (202) 693-2350, (TTY
(877) 889-5627) for assistance in locating docket submissions.
Instructions: All submissions must include the agency name and OSHA
docket number (OSHA-2010-0037) for the Information Collection Request
(ICR). OSHA will place all comments, including any personal
information, in the public docket, which may be made available online.
Therefore, OSHA cautions interested parties about submitting personal
information such as social security numbers and birthdates. For further
information on submitting comments, see the ``Public Participation''
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Seleda Perryman or Theda Kenney,
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor;
telephone (202) 693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of the continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, the collection instruments are clearly understood, and
OSHA's estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires that OSHA obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of effort in
obtaining information (29 U.S.C. 657).
The following sections describe who uses the information collected
under each requirement, as well as how they use it. The purpose of
these requirements is to reduce employees' risk of death or serious
injury by ensuring that employment has been tested and is in safe
operating condition.
Section 1910.255(e) requires that a periodic inspection of
resistance welding equipment be made by qualified maintenance
personnel, and that a certification record be generated and maintained.
The certification shall include the date of the inspection, the
signature of the person who performed the inspection and the serial
number, or other identifier, for the equipment inspected. The record
shall be made available to an OSHA inspector upon request. The
maintenance inspection ensures that welding equipment is in safe
operating condition while the maintenance record provides evidence to
workers and agency compliance officers that employers performed the
required inspections.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the agency's functions to
protect workers, including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection, and transmission techniques.
III. Proposed Actions
The agency requests an adjustment decrease of 187 burden hours
(from 5,806 burden hours to 5,619 burden hours) associated with the
collections of information in the Welding, Cutting, and Brazing
Standard. This adjustment decrease is a result of a decrease in the
number of welders, cutters, solders, and brazers in general industry
from 21,770 to 21,070 a difference of 700 welders, cutter, solders, and
brazers in the previous package. The agency will summarize any comments
submitted in response to this notice and will include this summary in
its request to OMB.
OSHA will summarize the comments submitted in response to this
notice and will include this summary in the request to OMB to extend
the approval of the information collection requirements.
Type of Review: Extension of a currently approved collection.
Title: The Standard for Welding, Cutting, and Brazing (29 CFR part
1910, subpart Q).
OMB Control Number: 1218-0207.
Affected Public: Business or other for-profits.
Number of Respondents: 21,070.
Number of Responses: 84,280.
Frequency of Responses: On occasion.
Average Time per Response: Varies.
Estimated Total Burden Hours: 5,619.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. Please
note: While OSHA's Docket Office is continuing to accept and process
submissions by regular mail due to the COVID-19 pandemic, the Docket
Office is closed to the public and not able to receive submissions to
the docket by hand, express mail, messenger, and courier service. All
comments, attachments, and other material must identify the agency name
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0037). You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or a facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so that the agency can attach
them to your comments.
Due to security procedures, the use of regular mail may cause a
significant delay in the receipt of comments.
Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this
website. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the http://www.regulations.gov website to submit comments and
access the docket is available at the website's ``User Tips'' link.
Contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627)
for information about materials not available from the website, and for
assistance in using the internet to locate docket submissions.
V. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 8-2020
(85 FR 58393).
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2022-24445 Filed 11-8-22; 8:45 am]
BILLING CODE 4510-26-P
