1
02/04/2013 - 1910.133(a)(3) - OSHA requirement for updating Prescription Safety Glasses
2
04/14/2008 - 1910.133(a)(1) - Request to provide list of corrosive materials and concentrations requiring use of emergency eyewashes and showers.
3
05/14/2007 - 1910.133(a)(3) - Employer liability and payment requirements for prescription protective eyewear.
4
05/14/2007
- 1910.133, 1910.133(a)(3) -
Employer liability and payment requirements for prescription protective eyewear.
5
01/29/2007 - 1910.133(b)(1) - Detachable vs. permanent side shields for safety glasses; modifications to safety glasses.
6
01/29/2007 - 1910.133(a)(2) - Detachable vs. permanent side shields for safety glasses; modifications to safety glasses.
7
11/11/1998
- 1910.133 -
Assessing hazards to select eye and respiratory protection.
8
04/18/1997
- 1910.133 -
Lack of public awareness of the limitations of eyewashes; review of new product, The Eye Irrigator(TM).
9
07/03/1995
- 1910.133 -
Interpretation of the Personal Protective Equipment standard
10
09/29/1994
- 1910.133 -
Subpart I, and Subpart S requirements as they apply to electrical workers who wear glasses.
11
08/11/1994
- 1910.133 -
Requirements for emergency eyewash stations in retail autoparts stores
12
03/31/1994
- 1910.133 -
Standard requirements for eyewash and shower equipment, personnel and other protective equipment and air circulation fans, used in an automotive battery charging area
13
10/10/1990
- 1910.133 -
Emergency eye and face wash products.
14
02/13/1989 - 1910.133(b)(2) - The ENCON/FT-Collection meets the intent of the OSHA eye and face protection standard.
15
10/13/1988 - 1910.133(b)(2) - Gentex Shade 2.0 protective eyewear is in compliance with 1910.133(b)(2).
16
05/02/1988 - 1910.133(b)(2) - Protective eyewear in clear, dark green, gray and amber tints, is in compliance with 1910.133(b)(2).
17
04/28/1988 - 1910.133(b)(2) - Protective eyewear bearing the Gentex Omnibird logo is in compliance with 1910.133(b)(2).
18
03/16/1988
- 1910.133 -
Encon Tuff-Spec safety spectacle meets the intent of 1910.133.
19
09/03/1986 - 1910.133(b)(2) - The Willson "type 3" eye protective device complies with ANSI Z87. 1-1968.
20
10/21/1985 - 1910.133(b)(2) - The Willson SPECTRA eye protective device complies with ANSI Z87.1- 1968.
21
08/30/1985 - 1910.133(b)(2) - The Gleneagle spectacle with 2-mm thick polycarbonate plano lenses complies with ANSI Z87.1-1968.
22
07/17/1985 - 1910.133(b)(2) - The Uvex Winter Optical Ultra-Spec 2000 eye protective device complies with ANSI Z87.1-1968.
23
06/05/1985
- 1910.133 -
Standards applicable to Bell Industries "Carb-Cutter" powered tool.
24
08/13/1984 - 1910.133(b)(2) - Yellow Duraguard eye protectors comply with ANSI Z87.1-1968 but should not be used for welding or similar activities.
25
08/07/1984 - 1910.133(b)(2) - Rose tint lenses are allowed for safety glasses if they comply with ANSI Z87.1-1968.
26
10/22/1982 - 1910.133(a)(3) - Wearing of contact lenses while welding
27
12/09/1976 - 1910.133(b)(2) - Clip-on Side Shields.