1
01/31/2005 Requirements for protecting against the automatic restart of low-voltage light-duty woodworking and metalworking equipment following an unscheduled electrical outage.
2
01/31/2005
Requirements for protecting against the automatic restart of low-voltage light-duty woodworking and metalworking equipment following an unscheduled electrical outage.
3
05/13/2003
OSHA machine guarding standards and the ISO/IEC standards adopted under the GATT; National Emphasis Program on Amputations
4
07/12/2002 Request for guidance on saws operated on "cut-climb/reverse-rotation" mode
5
07/12/2002 Request for guidance on saws operated on "cut-climb/reverse-rotation" mode
6
11/15/1999 Guarding/hazards of using woodcutting sawblades on a cut-off machine
7
04/25/1996
Permanent Variance Requirements for Self-Feed Circular Ripsaws.
8
03/14/1996
Request for Interpretation - 29 CFR 1910.213(f)(2).
9
10/19/1994
Information relating to radial saws.
10
03/13/1991
Automatic return attachments on radial saws
11
12/28/1990 "Brett-Guard" style blade guard meets hand-fed ripsaw requirements
12
11/09/1990 Litigation relative to the severance of a hand by a high school student while using a radial arm saw.
13
03/13/1990 Specification for Lower Blade Guards for Radial Arm Saws
14
07/13/1987 Guarding requirements for the "Speed Cut" radial saw.
15
03/12/1984
Conformance of the Blue Line PFR/Power Failure Release Option with applicable OSHA standards.
16
11/02/1978
Clarificiation of two General Industry Safety and Health Standards.
17
05/30/1978
OSHA standards 29 CFR 1910.213(o)(2) and (4) to a normal non-automatic 12-inch wood lathe that is used in a high school shop.
18
10/11/1977
The point of operation guarding on the Biro Power Meat Cutters (bandsaws).
19
06/30/1977 Guarding requirements for radial saws.
20
02/25/1976
Standards with Identical Requirements.
21
02/12/1975 Guarding requirements for radial saws.
