#	Standard Interpretations
1	02/11/2013 - 1910.217(b)(7)(iii) - Need for Removing Selector Key on Part Revolution Mechanical Power Presses
2	05/04/2007 - 1910.217 - Lockout/Tagout and the provisions for testing or positioning of machines while they are energized.
3	04/22/2005 - 1910.217(d)(9)(iv) - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
4	04/22/2005 - 1910.217, 1910.217(d)(9)(iv) - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
5	08/21/2003 - 1910.217 - Maximum permissible guard openings for blade guards on cooling fans
6	05/13/2003 - 1910.217 - OSHA machine guarding standards and the ISO/IEC standards adopted under the GATT; National Emphasis Program on Amputations
7	12/23/1998 - 1910.217(c)(3)(iii) - Proper installation of presence sensing devices for mechanical power presses.
8	05/08/1998 - 1910.217 - Multiple interpretations regarding mechanical power presses
9	01/22/1998 - 1910.217(c) - Point of operation guarding for power presses.
10	03/29/1996 - 1910.217 - Machine Guarding Standard.
11	02/13/1996 - 1910.217 - Third party certification for the Astro-Press 1000 control system.
12	04/20/1994 - 1910.217 - Mechanical power press brake system monitoring requirements.
13	12/21/1992 - 1910.217 - Two-hand control device used to operate a mechanical power press in continuous mode.
14	06/08/1992 - 1910.217 - Capacitive sensor palm buttons.
15	01/31/1992 - 1910.217 - Specialized devices used to control mechanical power presses.
16	12/24/1991 - 1910.217 - Mechanical power press requirements and platen presses.
17	07/23/1986 - 1910.217 - Power Presses of the Powder Metal Industry.
18	10/04/1983 - 1910.217 - The use of self-tripping on hydraulic power presses.
19	12/09/1982 - 1910.217 - Utilization of a Stop Time Measuring Instrument for Verification of Compliance With 29 CFR 1910.217.
20	04/29/1982 - 1910.217 - Installation of a single stroke mechanism on full revolution mechanical power presses.
21	01/13/1981 - 1910.217 - The appropriate location for an air pressure sensor.
22	12/18/1980 - 1910.217 - The application of presence sensing devices to general purpose power press brakes.
23	11/19/1980 - 1910.217 - Whether an electro-mechanical single stroke device fulfills the requirements for a single stroke mechanism under 1910.217.
24	09/23/1980 - 1910.217 - Power press brake used as a mechanical power press (punch press).
25	06/24/1980 - 1910.217 - Single stroke mechanism as used on full revolution mechanical power presses.
26	03/05/1980 - 1910.217(c)(1)(i) - Evaluation of hair pen point of operation guards
27	12/20/1979 - 1910.217 - The Mechanical Power Press Standard.
28	08/06/1979 - 1910.217 - Safeguarding the point of operation on mechnical power presses.
29	06/13/1978 - 1910.217 - Platen Presses.
30	07/26/1977 - 1910.217 - Presence sensing devices used to actuate mechanical power presses.
31	06/14/1977 - 1910.217 - A request that the Automatic Nailing Machine be listed in 1910.217.
32	02/22/1977 - 1910.217 - Mechanical Power Presses.
33	01/10/1977 - 1910.217 - Guarding of Punch Presses.
34	11/10/1976 - 1910.217 - Displeasure with the procedures utilized by OSHA.
35	07/29/1975 - 1910.217 - Punch presses and the revised standard for mechanical power presses.
36	07/17/1975 - 1910.217 - Interpretation of Mechanical Power Presses.