# Standard Interpretations
1 - 1910.36 - Exit Signs
2 - 1910.36(g)(2) - Termination of the January 2009 Corporate-Wide Settlement Agreement between United Parcel Service (UPS) and OSHA; Enforcement of 20 CFR 1910.37(a)(3) and 29 CFR 1910.36(g)(2)
3 - 1910.36(g) - Exit route stairways that comply with the codes of the NFPA and the IFC
4 - 1910.36 - There are no specific OSHA standards or requirements applicable to overhead doors.
5 - 1910.36(b) - Minimum width of exit routes; redesignation of 1910.1020.
6 - 1910.36(g)(2) - Minimum width of exit routes; redesignation of 1910.1020.
7 - 1910.36(g)(2), 1910.36, 1910.36(b) - Minimum width of exit routes; redesignation of 1910.1020.
8 - 1910.36 - Key to open locked exits.
9 - 1910.36(g)(2) - Exit route requirements as it relates to the widths of doorways into electrical equipment enclosures.
10 - 1910.36(b)(4) - Locked exit doors are not permitted.
11 - 1910.36(d) - Exits must not be locked or obstructed.
12 - 1910.36(d)(2) - Electronic door opening device used with a security system.
13 - 1910.36, 1910.36(d)(2) - Electronic door opening device used with a security system.
14 - 1910.36(d)(1) - Security door lock system presently installed in the Research and Development building.
15 - 1910.36, 1910.36(d)(1) - Security door lock system presently installed in the Research and Development building.
16 - 1910.36(g)(1) - Interpretation when height of exit route corridors are lower than specified.
17 - 1910.36, 1910.36(g)(1) - Interpretation when height of exit route corridors are lower than specified.
18 - 1910.36(g)(2) - Exit Routes.
19 - 1910.36, 1910.36(g)(2) - Exit Routes.
20 - 1910.36(c)(2) - The discharge from exits in the Blackwill Burner Company plant.
21 - 1910.36(c)(1) - The discharge from exits in the Blackwill Burner Company plant.
22 - 1910.36, 1910.36(c)(1), 1910.36(c)(2) - The discharge from exits in the Blackwill Burner Company plant.
23 - 1910.36 - OSHA standards of exit requirements in steam tunnels.
24 - 1910.36(b)(8) - 1910.36(b)(8) does not automatically require at least two means of egress.
25 - 1910.36(g)(2) - Clarification of requirements that exit routes be maintained clear of all obstructions.
26 - 1910.36, 1910.36(g)(2) - Clarification of requirements that exit routes be maintained clear of all obstructions.
27 - 1910.36 - How means of egress shall be located and identified.
28 - 1910.36(g)(1) - Clarification of head room requirements for emergency doors and machine guarding.
29 - 1910.36(g)(1) - Interpretation for doorways not complying with exit route requirements.
30 - 1910.36, 1910.36(g)(1) - Interpretation for doorways not complying with exit route requirements.
31 - 1910.36(b)(4) - Clarification on locks and exit signs for emergency exits.