1
05/06/2019
Clarification on rigging for hoisting multiple bundles of construction materials
2
06/08/2012 Proof testing of lifting beams used to lift wind turbine components.
3
06/08/2012
Proof testing of lifting beams used to lift wind turbine components.
4
03/31/2010 Padded slings/wire rope during steel erection.
5
03/31/2010
Padded slings/wire rope during steel erection.
6
03/01/2010 Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.
7
03/01/2010 Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.
8
03/01/2010
Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.
9
01/25/2006 OSHA requirements applicable to use of the Contex "Magic Arm" below-the-hook lifting device.
10
03/04/2004 Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design.
11
03/04/2004 Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design.
12
02/09/2004 Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
13
02/09/2004
Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
14
07/07/2003 Marking and proof-testing requirements for special custom-designed lifting accessories.
15
07/07/2003 Marking and proof-testing requirements for special custom-designed lifting accessories.
16
07/07/2003
Marking and proof-testing requirements for special custom-designed lifting accessories.
17
02/25/2003 Retesting of reassembled lifting accessories if original manufacturing controls are ensured; retesting requirement if repair/replacement of parts due to breakage, damage, or evidence of diminished capacity.
18
02/25/2003
Retesting of reassembled lifting accessories if original manufacturing controls are ensured; retesting requirement if repair/replacement of parts due to breakage, damage, or evidence of diminished capacity.
19
08/15/2002 Rigging equipment for material handling; custom-designed accessories.
20
06/14/2002 Custom-designed lifting accessories must be proof-tested and marked before being deployed for use and after repair or replacement.
21
08/04/2000 Alloy steel chain slings must not be loaded beyond working load limit.
22
08/04/2000 Alloy steel chain slings must not be loaded beyond working load limit.
23
02/10/1994
Use of synthetic fiber slings.
24
01/19/1993
Rigging equipment for material handling.
25
08/19/1992
Cage, skip and load connections to hoist ropes.
26
12/02/1991
OSHA Requirements Addressing Fall Protection Equipment
27
12/14/1977 A knot in a wire rope is a recognized hazard for material handling.
28
10/05/1977 Requirements for wire rope fittings (CASTLOK Bend-Master) in construction.
29
08/20/1976
Wire rope were used as a bull wire
30
03/07/1975 Clarification on standard for rigging equipment for material handling - wire rope.
