#	Standard Interpretations
1	10/01/2019 - 1926.32 - Regarding the applicability of construction standards to certain commercial sign installation activities
2	08/31/2017 - 1926.32(m) - Gate Strength of Snaphooks and Carabiners
3	08/31/2017 - 1926.32(f) - Gate Strength of Snaphooks and Carabiners
4	07/14/2016 - 1926.32(g) - Whether handling of stones for foundation work is considered a construction activity; Clarification of whether a crane can be derated based on the load being lifted.
5	03/10/2006 - 1926.32(f) - Training requirements for powder-actuated tools under §1926.302(e).
6	02/07/2005 - 1926.32(f) - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.
7	02/23/2004 - 1926.32(f) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable.
8	02/09/2004 - 1926.32(q) - Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
9	02/09/2004 - 1926.32, 1926.32(q) - Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
10	12/18/2003 - 1926.32(f) - Clarification on several issues regarding OSHA's construction industry standards for fall protection
11	11/18/2003 - 1926.32(g) - Clarification of maintenance vs. construction activities; standards applicable to the removal and replacement of steel tanks and structural steel supports.
12	12/11/2001 - 1926.32(g) - Guarding requirements for a rotary pneumatic angle-drive hand-held tool.
13	12/11/2001 - 1926.32, 1926.32(g) - Guarding requirements for a rotary pneumatic angle-drive hand-held tool.
14	08/14/2000 - 1926.32(f) - Clarification of the terms "hole" versus "unprotected sides or edges."
15	08/31/1995 - 1926.32 - Clarification of the OSHA standard 1926.32 addressing competent persons at construction sites.
16	12/01/1993 - 1926.32 - Keller ladder proper set up.
17	10/23/1992 - 1926.32 - Certification of aerial lift operators.
18	04/16/1992 - 1926.32 - Rear fly extension ladders manufactured by Keller Industries.
19	04/15/1992 - 1926.32 - Rules addressing competent persons and qualified persons.
20	12/06/1991 - 1926.32 - Use of crane or derrick suspended personnel platforms accessing a worksite.
21	07/19/1989 - 1926.32 - Clarification of the term "approved".
22	04/26/1977 - 1926.32(f) - Aerial lifts and digger derricks used by utility companies.