1
04/30/2010 - 1926.502(k)(7) - Clarification on controlled access zones for leading edge work.
2
04/30/2010
- 1926.502(k), 1926.502(k)(7) -
Clarification on controlled access zones for leading edge work.
3
02/28/2005
- 1926.502(k) -
Whether under STD 03-00-001 an employee, in absence of interior walls is permitted to climb the lower chords of the roof trusses to brace them.
4
11/30/2004
- 1926.502(k) -
Residential fall protection: safety monitors; walking top plate of braced walls in installation; warning line; plating exterior walls; height limitation; non-roofer PPE; slide guards
5
04/20/2004
- 1926.502(k) -
Alternative fall protection for leading edge work during precast concrete erection.
6
03/01/2004
- 1926.502(k) -
The predominant use of structural steel would not be considered "residential construction"
7
12/18/2003
- 1926.502(k) -
Clarification on several issues regarding OSHA's construction industry standards for fall protection
8
12/17/2003
- 1926.502(k) -
Clarification of several residential construction and fall protection issues.
9
09/26/2003 - 1926.502(k)(7) - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
10
09/26/2003
- 1926.502(k), 1926.502(k)(7) -
Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
11
07/07/2003
- 1926.502(k) -
Requirements for fall protection when ladder jack scaffolds are used for residential and commercial construction
12
06/24/2002
- 1926.502(k) -
Clarification concerning fall protection and vertical walled trenches with depth of 6 feet or greater and use of controlled access zones.
13
06/08/1998
- 1926.502(k) -
Fall protection for exposure to unfilled swimming pools.
14
03/23/1995
- 1926.502(k) -
Safety plans as set forth in Subpart M -- Fall Protection for the Construction Industry.