1
04/22/2011
- 1926.760, 1926.760(a), 1926.760(c) -
Distance at which fall protection is required for steel erection activities.
2
08/10/2010
- 1926.760, 1926.760(c)(3) -
Acceptable equivalent to control lines for a Controlled Decking Zone (CDZ) in steel erection activities. 29 CFR 1926.760(c)(3).
3
03/02/2010
- 1926.760, 1926.760(a)(1) -
Whether an employer can use a controlled access zone during curtain wall installation.
4
04/05/2005
- 1926.760, 1926.760(a), 1926.760(a)(1), 1926.760(a)(13), 1926.760(a)(3), 1926.760(b), 1926.760(b)(1), 1926.760(b)(3) -
Evaluation if moving point-to-point on concrete wall to make initial connections of structural steel is "connecting" work; landing loads on systems-engineered metal building.
5
08/03/2004
- 1926.760, 1926.760(a)(1), 1926.760(a)(3), 1926.760(b), 1926.760(c) -
Use of fall protection by deaf employees performing steel erection activities.
6
12/22/2003
- 1926.760, 1926.760(c), 1926.760(c)(3), 1926.760(c)(5) -
Designation of an entire floor as a controlled decking zone for steel decking work.
7
09/26/2003
- 1926.760, 1926.760(c)(3) -
Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
8
07/07/2003
- 1926.760 -
Requirements for fall protection when ladder jack scaffolds are used for residential and commercial construction
9
04/09/2003
- 1926.760, 1926.760(a), 1926.760(a)(1), 1926.760(b), 1926.760(c), 1926.760(a)(3) -
OSHA standards set minimum safety and health requirements;they do not prohibit employers from adopting more stringent requirements.
10
12/21/2001
- 1926.760 -
Decision to release the new compliance directive for the steel erection standard in draft form.
11
09/27/2001
- 1926.760 -
History and background of the Steel Erection Final Rule.