Standard Interpretations
OSHA requirements are set by statute, standards, and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. Each letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information.
- 1910.261 - Batch digester safety in the paper industry. - 08/17/1995
- 1910.261 - Calendar stacks used in the pulp and paper industry - 05/01/1991
- 1910.261 - Confined Space provisions of 29 CFR 1910.261 in light of the promulgation of 29 CFR 1910.146 - 07/07/1993
- 1910.261 - Duplex Rewinder Bar Guards. - 07/13/1978
- 1910.261 - Evaluation of Variance #2272, application for permanent variance and interim order. - 02/07/1995
- 1910.261 - Heavy-duty pipe, valves and fittings must be used between digesters and blow pits. - 05/12/1992
- 1910.261 - Interpretation of OSHA standards 1910.261(a)(1) and 1910.261(a)(4)(ii) - 06/14/1990
- 1910.261 - OSHA standards that may apply to one-man radio-controlled locomotives in the steel industry. - 11/14/1989
- 1910.261 - OSHA's position on complying with an updated national consensus standard. - 09/28/2009
- 1910.261 - Request for a permanent variance and interim order. - 05/25/1995
- 1910.261 - The ASME Pressure Vessel Code. - 06/16/1982
- 1910.261(a) - Mills and calendars in the rubber and plastics industries. - 05/07/1976
- 1910.261(a)(1) - Interpretation of OSHA standards 1910.261(a)(1) and 1910.261(a)(4)(ii) - 06/14/1990
- 1910.261(a)(3)(v) - Installation of handrails on mobile belt loader conveyors. - 03/01/1977
- 1910.261(a)(4)(ii) - Interpretation of OSHA standards 1910.261(a)(1) and 1910.261(a)(4)(ii) - 06/14/1990
- 1910.261(b)(1) - Interpretation of Lockouts. - 01/14/1977
- 1910.261(c) - Changes to asbestos warning signs and ANSI warning signs - 10/13/2015
- 1910.261(g)(12)(ii) - Digester Piping Must Be Secured With Through Bolts - 01/22/2013
- 1910.261(g)(12)(iv) - Requirement to pin or lock digester valves - 04/18/1975
- 1910.261(g)(9) - Request for variance from digester building exit requirements. - 05/29/1996