Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1391183.015
Citation: 01001
Citation Type: Serious
Abatement Date: 10/30/2019
Initial Penalty: $11,934.00
Current Penalty: $0.00
Issuance Date: 09/26/2019
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC): A;R
Gravity: 10
Report ID: 0112600
Contest Date: 11/15/2019
Final Order: 08/19/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 08/19/2022 | $0.00 | 10/30/2019 | Serious | |
| Penalty | C: Contested | 11/19/2019 | $11,934.00 | 10/30/2019 | Serious | |
| Penalty | Z: Issued | 09/26/2019 | $11,934.00 | 10/30/2019 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Site: Building 1, at the Coating Line, on the catwalk above the Main Drive component, in the facility at 130 Riverdale Street, Northbridge, MA 01534: On 4/3/2019 a Coating Line Operator working from the catwalk did not utilize Energy Control Procedure RMC-021 for the control of potentially hazardous energy prior to commencing with activities covered by this subpart. This included using his foot on the moving wire mesh in order to straighten it. (b) Site: Building 1, at the Coating Line, at the Main Drive on the aisle side, 130 Riverdale Street, Northbridge, MA 01534: On 4/3/2019 a Coating Line Operator did not utilize Energy Control Procedure RMC-021 for the control of potentially hazardous energy prior to commencing with activities covered by this subpart. This included accessing the main drive area while the wire mesh was moving in order to straighten it.