Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1353654.015
Citation: 01002A
Citation Type: Serious
Abatement Date: 04/15/2020 2
Initial Penalty: $8,525.00
Current Penalty: $8,500.00
Issuance Date: 04/08/2019
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): A
Gravity: 5
Report ID: 0830500
Contest Date: 04/30/2019
Final Order: 05/18/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/18/2020 | $8,500.00 | 04/15/2020 | Serious | |
| Penalty | C: Contested | 05/01/2019 | $8,525.00 | 05/13/2019 | Serious | |
| Penalty | Z: Issued | 04/08/2019 | $8,525.00 | 05/13/2019 | Serious |
Text For Citation: 01 Item/Group: 002A Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards by table saw kick-blade: a) Sun Mountain, Inc. at 140 Commerce Road, Berthoud, Colorado: On or before October 16, 2018, the employer did not ensure employees were protected from struck-by hazards, in that the riving knife was not installed on the SawStop table saw while rabbeting. This condition exposed employees to struck-by hazards by table saw kick-back. Among other methods, a feasible and acceptable means of abatement is to read and follow the warnings listed in the owner's manual. Page 8 of the SawStop 10" Professional Cabinet Saw states "Use the riving knife for non-through sawing". Additionally, page 32 states "The riving knife should always be used whenever you need to make rabbet or other non-through cuts (where the blade does not cut through the top of the wood) and narrow cuts where the guard would interfere with the rip fence."