Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1248291.015
Citation: 01005
Citation Type: Serious
Abatement Date: 02/02/2018 2
Initial Penalty: $12,934.00
Current Penalty: $0.00
Issuance Date: 01/08/2018
Nr Instances: 2
Nr Exposed: 3
Related Event Code (REC): R
Gravity: 10
Report ID: 0524200
Contest Date: 02/07/2018
Final Order: 04/22/2019
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/22/2019 | $0.00 | 02/02/2018 | Serious | |
| Penalty | C: Contested | 02/21/2018 | $12,934.00 | 02/02/2018 | Serious | |
| Penalty | Z: Issued | 01/08/2018 | $12,934.00 | 02/02/2018 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Bay 8- On July 19, 2017, the employer failed to ensure that all areas where hazards were created by the point of operation were effectively guarded on the Tsune 20 Circular Sawing Machine. b) Bay 8- On or about July 13, 2017, the employer failed to ensure that all areas where hazards were created by the point of operation were effectively guarded on the Tsune 21 Circular Sawing Machines. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.