Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1502017.015
Citation: 01005
Citation Type: Serious
Abatement Date: 06/24/2021 2
Initial Penalty: $6,008.00
Current Penalty: $6,008.00
Issuance Date: 05/07/2021
Nr Instances: 2
Nr Exposed: 6
Related Event Code (REC):
Gravity: 5
Report ID: 0418200
Contest Date: 05/20/2021
Final Order: 03/04/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | J: ALJ Decision | 03/04/2022 | $6,008.00 | 06/24/2021 | Serious | |
| Penalty | C: Contested | 08/16/2021 | $6,008.00 | 06/24/2021 | Serious | |
| Penalty | Z: Issued | 05/07/2021 | $6,008.00 | 06/24/2021 | Serious |
Text For Citation: 01 Item/Group: 005 Hazard:
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about 11/09/2020, guarding to prevent the operator(s) from having any part of the body within point of operation during the operating cycle was not provided for the following equipment, and thus potentially exposed the operator(s) to pinch point and/or caught by hazards: a. The 175-ton(Accupress) Press Brake: Model no. - 717512, Serial no. - 9972 located in the center of the main shop area. b. The 175-ton Accupress Press Brake: Model no. - 17516, Serial no. 721416 located in the center of the main shop area. c. The RIKON 17 inch floor drill press: Model 30-230 located in the east main shop area.