Text For Citation: 01 Item/Group: 025C Hazard:

29 CFR 1910.305(e)(1): Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in damp or wet locations were not installed to prevent moisture or water from entering and accumulating within the enclosures: Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in damp or wet locations were not installed to prevent moisture or water from entering and accumulating within the enclosures, in the following instances: a) #7 Paper Machine - The energized 110 volt receptacle, at the bottom of the #7 WC Wet End Raw Stock Lighting Panel, was not properly installed to prevent moisture or water from entering and accumulating within the enclosure. b) #8 Paper Machine Drive Side - Condensation from the river water pipe drips condensation down onto the "Cal Elec Eye" 110 volt panel. c) #7 Mezzanine Sub-Station - Tarps were used to catch condensation over the motor control center caused by the hot air coming in from the #8 paper machine duct work to prevent water from seeping into the equipment. d) #7 Mezzanine Sub-Station - Tarps were used to catch water leaking from the air conditioner down onto Unit #7, operating at 575 volts.