Translate
Violation Detail
Standard Cited: 19100219 C02 I Mechanical power-transmission apparatus.
Inspection Nr: 1207843.015
Citation: 01026A
Citation Type: Serious
Abatement Date: 02/02/2018 2
Initial Penalty: $8,873.00
Current Penalty: $4,260.00
Issuance Date: 06/26/2017
Nr Instances: 6
Nr Exposed: 10
Related Event Code (REC):
Gravity: 10
Report ID: 0215800
Contest Date: 07/09/2017
Final Order: 02/02/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 02/02/2018 | $4,260.00 | 02/02/2018 | Serious | |
| Penalty | C: Contested | 07/26/2017 | $8,873.00 | 07/07/2017 | Serious | |
| Penalty | Z: Issued | 06/26/2017 | $8,873.00 | 07/07/2017 | Serious |
Text For Citation: 01 Item/Group: 026A Hazard:
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) On or about 1/31/2017, Machine room: A 12 inch section of 1.5 inch diameter shafting on the drive side blower motor was not guarded. b) On or about 2/1/2017, Machine room: A 5 inch section of 3 inch diameter shaft for the calender drive was not guarded. c) On or about 2/1/2017, Machine room: A 2 foot section of 3 inch diameter shaft by the rewinder pulpit was not guarded. d) On or about 2/7/2017, Basement: A 2.5 inch section of a 1 inch diameter shaft for the calender hydraulic pump was not guarded. e) On or about 2/15/2017, Basement: A 3 inch section of a 1 inch diameter shaft on the clear water pump was not guarded. f) On or about 2/16/2017, Boiler room: A 4 inch section of a 2 inch diameter shaft on a feed water pump was not completely guarded. Abatement documentation is required for these items.