Violation Detail
Standard Cited: 19100303 G02 I General.
Inspection Nr: 1207843.015
Citation: 01040
Citation Type: Serious
Abatement Date: 02/02/2018 2
Initial Penalty: $6,338.00
Current Penalty: $3,042.00
Issuance Date: 06/26/2017
Nr Instances: 12
Nr Exposed: 23
Related Event Code (REC):
Gravity: 5
Report ID: 0215800
Contest Date: 07/09/2017
Final Order: 02/02/2018
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 02/02/2018 | $3,042.00 | 02/02/2018 | Serious | |
Penalty | C: Contested | 07/26/2017 | $6,338.00 | 07/07/2017 | Serious | |
Penalty | Z: Issued | 06/26/2017 | $6,338.00 | 07/07/2017 | Serious |
Text For Citation: 01 Item/Group: 040 Hazard:
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): a) On or about 1/27/2017, Filler beater area: There were exposed energized parts inside of the blue beater control box. b) On or about 1/27/2017, Stock prep area: There were two electric boxes mounted on the wall of the mezzanine storage room. The covers were open on these boxes which had exposed energized parts inside. c) On or about 1/31/2017, Machine room: The drive cabinet doors for the winder located on the dry end were open, exposing energized parts. d) On or about 2/1/2017, Machine room: A circuit breaker box on the drive side wall near the winder had an exposed buss. e) On or about 2/7/2017, Basement: A relay on top of the hydraulic pump motor for the calender had exposed energized parts. f) On or about 2/7/2017, Basement: A red colored electrical cabinet had exposed energized parts inside. g) On or about 2/7/2017, Basement: An elevator control box had a blank missing, which exposed energized parts. h) On or about 2/7/2017, Basement: There were two control boxes inside of the Motor Control Room number 2, which were partially opened, exposing energized parts inside. i) On or about 2/16/2017, Stock prep area: There were energized electrical parts inside of an area used for storage located inside of the beater room office. j) On or about 2/16/2017, Stock prep area: There was an open electrical box located on the exterior of the beater room office wall with exposed energized parts. k) On or about 2/16/2017, Boiler house: The first floor electric room had a cabinet with a door opened, exposing energized parts. l) On or about 4/7/2017, Roof area: Numerous control boxes inside of the Motor Control Room number 3 were open, exposing energized parts. Abatement certification is required for this item.