Translate
Violation Detail
Standard Cited: 19100215 B09 Abrasive wheel machinery.
Inspection Nr: 1692259.015
Citation: 02001B
Citation Type: Serious
Abatement Date: 02/16/2024
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/19/2024
Nr Instances: 3
Nr Exposed: 5
Related Event Code (REC): C
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 02/14/2024
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/14/2024 | $0.00 | 02/16/2024 | Serious | |
| Penalty | Z: Issued | 01/19/2024 | $0.00 | 02/16/2024 | Repeat |
Text For Citation: 02 Item/Group: 001B Hazard:
29 CFR 1910.215(b)(9): Exposure adjustment. Safety guards of the types described in Subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b)(3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.): a) On or about August 21, 2023, at the establishment located at 3575 N. Main Street, Oshkosh, WI, a peripheral protecting member was not installed on the left or right side grinders of the Trimmer #1 stand grinder. The distance between the abrasive cutoff wheel and the top opening edge of the guard exceeded 0.25 inches on the left and right side grinders. b) On or about August 21, 2023, at the establishment located at 3575 N. Main Street, Oshkosh, WI, a peripheral protecting member was not installed on the left or right side grinders of the Trimmer #2 Baldor Cat 1215W Stand Grinder Serial Number K1601237510. t 1215W Stand Grinder Serial Number K1601237510. c) On or about August 21, 2023, at the establishment located at 3575 N. Main Street, Oshkosh, WI, the distance between the abrasive cutoff wheel and the installed peripheral protecting member exceeded 0.25 inches on the left and side grinders of the Trimmer #3 Baldor Cat 1021W Stand Grinder Serial Number K1601067502. Oshkosh Coil Spring was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.215(a)(4), which was contained in OSHA inspection number 1601805, citation number 1, item number 2b and was affirmed as a final order on November 22, 2022, with respect to a workplace located at 3575 N Main Street, Oshkosh, WI.