1
04/20/2012
Clarification on the use of safety monitors as a method of fall protection on a low-slope roof.
2
09/30/2010
Whether OSHA will rely on ANSI Z359.1-2007, regarding snaphook compressive strength requirements, in enforcing the general duty clause with respect to personal fall arrest systems in construction, as announced in Letter #20070920-8088.
3
04/30/2010
Clarification on controlled access zones for leading edge work.
4
04/06/2010
Whether OSHA construction standards require a manhole cover to support at least twice a vehicle's applied axle load, regardless of the cover's size.
5
03/02/2010
Whether an employer can use a controlled access zone during curtain wall installation.
6
11/26/2007
Whether the "Clear Gear Lanyard Elevator" conforms to OSHA construction standards.
7
04/17/2006
Guardrail height requirements for construction activities in General Industry Facilities.
8
11/30/2004
Residential fall protection: safety monitors; walking top plate of braced walls in installation; warning line; plating exterior walls; height limitation; non-roofer PPE; slide guards
9
02/19/2004
Fall protection components from different manufacturers may be used together provided connecting parts are sized compatibly.
10
10/31/2003
Compliance requirements for the use of U-bolt-type cable clamps in horizontal lifelines.
11
09/26/2003
Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
12
07/09/2003
Clarification of 1926.502(d)(6) term "designed for" in snaphook connections.
13
07/07/2003
Requirements for fall protection when ladder jack scaffolds are used for residential and commercial construction
14
11/15/2002
Fall protection requirements for employees, other than roofers, working on low-slope roofs
15
11/08/2002
Applicability of the steel erection standard to repair and installation of metal roofing and roofing accessories.
16
07/17/2002
Steel erection standard requirements concerning installation of perimeter safety cable.
17
09/18/2001
Fall protection requirements of various construction (1926) standards.
18
01/11/2001
PR 600 Mobile Fall Protection System.
19
08/28/2000
Clips used for wire rope guardrails; required fall protection in hoist area.
20
02/23/2000
Fall protection, training, inspection and design requirements of aerial lifts and scissor lifts/scaffolds.
21
04/16/1997
Fall protection in a situation regarding floor/roofing openings.
22
03/21/1997
Fall protection in lieu of personal fall arrest systems and the need for a rescue skiff.
23
12/04/1996
Infeasibility of 6 foot free fall limit.
24
07/23/1996
Enforcement of the fall protection standard and fall protection options.
25
02/14/1996
OSHA's policy regarding the use of scaffolds as fall arrest system anchors.
26
02/01/1996
Spacing of connections between safety net panels.
27
01/30/1996
Installation of fall protection equipment criteria in 1926.502.
28
01/26/1996
Manucroche Quick Connector for fall arrest systems.
29
11/02/1995
Fall restraint system used in lieu of fall arrest systems.
30
11/02/1995
If a fall restraint system could be considered a form of fall protection to be used instead of guardrails, safety lines, or fall arrest systems.
31
09/25/1995
OSHA's new fall protection standards for construction will prohibit use of safety belts with side dee rings as part of a personal fall arrest system
32
09/25/1995
Review of a new product, "The Safety Boot".
33
08/28/1995
The frequency of the load measuring system when testing fall arrest equipment should be set at 500 Hz.
34
03/15/1995
Compliance from OSHA for an inflatable fall arrest device.
