Standards No Longer Recognized
Note: OSHA no longer includes the test standards listed below in any NRTL's scope of recognition primarily because the standards have been withdrawn or replaced. Any other reason(s) for removing a test standard is shown parenthetically. See each "Federal Register Notice" cited below for details about the changes made to the scope of recognition of the applicable NRTLs. As mentioned in these notices, if appropriate, OSHA has already recognized those NRTLs for other test standards to replace any standard listed below. See OSHA's informational web page for each NRTL to determine its current scope of recognition.
Federal Register Notice: 78: 70329-70349, November 25, 2013 |
|
| Designation | Title |
| ANSI A90.1 | Safety Standard for Belt Manlifts |
| ASTM E2074 | Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies |
| ANSI/NFPA 11A | Medium- and High-Expansion Foam Systems |
| ANSI/NFPA 20 | Installation of Stationary Fire Pumps for Fire Protection |
| UL 94 | Tests for Flammability of Plastic Materials for Parts in Devices and Appliances |
| UL 187 | X Ray Equipment |
| UL 207 | Refrigerant-Containing Components and Accessories, Nonelectrical |
| UL 343 | Pumps for Oil-Burning Appliances |
| UL 512 | Fuseholders |
| UL 544 | Medical and Dental Equipment |
| UL 632 | Electrically-Actuated Transmitters |
| UL 651B | Continuous Length HDPE Conduit |
| UL 698 | Industrial Control Equipment for Use in Hazardous (Classified) Locations |
| UL 745-2-2 | Particular Requirements for Screwdrivers and Impact Wrenches |
| UL 745-2-4 | Particular Requirements for Sanders |
| UL 745-2-6 | Particular Requirements for Hammers |
| UL 745-2-8 | Particular Requirements for Shears and Nibblers |
| UL 745-2-9 | Particular Requirements for Tappers |
| UL 745-2-11 | Particular Requirements for Reciprocating Saws |
| UL 745-2-12 | Particular Requirements for Concrete Vibrators |
| UL 745-2-30 | Particular Requirements for Staplers |
| UL 745-2-33 | Particular Requirements for Portable Bandsaw |
| UL 745-2-34 | Particular Requirements for Strapping Tools |
| UL 746A | Polymeric Materials Short Term Property Evaluations |
| UL 746B | Polymeric Materials Long Term Property Evaluations |
| UL 746C | Polymeric Materials - Use in Electrical Equipment Evaluations |
| UL 746E | Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fiber, and Materials Used in Printed- Wiring Boards |
| UL 781 | Portable Electric Lighting Units for Use in Hazardous (Classified) Locations |
| UL 796 | Printed Wiring Boards |
| UL 877 | Circuit Breakers and Circuit Breaker Enclosures for Use in Hazardous (Classified) Locations (UL 1203) |
| UL 886 | Outlet Boxes and Fittings for Use in Hazardous (Classified) Locations |
| UL 894 | Switches for Use in Hazardous (Classified) Locations |
| UL 983 | Surveillance Camera Units |
| UL 1002 | Electrically Operated Valves for Use in Hazardous (Classified) Locations |
| UL 1005 | Electric Flatirons |
| UL 1010 | Receptacle Plug Combinations for Use in Hazardous (Classified) Locations |
| UL 1075 | Gas-Fired Cooking Appliances for Recreational Vehicles |
| UL 1097 | Double Insulation Systems for Use in Electrical Equipment |
| UL 1411 | Transformers and Motor Transformers for Use In Audio-, Radio-, and Television-Type Appliances |
| UL 1412 | Fusing Resistors and Temperature-Limited Resistors for Radio-, and Television-Type Appliances |
| UL 1413 | High Voltage Components for Television Type Appliances |
| UL 1414 | Across-the-Line, Antenna-Coupling, and Line- by-Pass Capacitors for Radio- and Television-Type Appliances |
| UL 1416 | Overcurrent and Overtemperature Protectors for Radio- and Television-Type Appliances |
| UL 1417 | Special Fuses for Radio- and Television-Type Appliances |
| UL 1433 | Control Centers for Changing Message Type Electric Signs |
| UL 1445 | Electric Water Bed Heaters |
| UL 1604 | Electrical Equipment for Use in Class I and II, Division 2 and Class III Hazardous (Classified) Locations |
| UL 1664 | Immersion Detection Circuit Interrupters |
| UL 1666 | Test for Flame Propagation Height of Electrical and Optical Fiber Cables Installed Vertically in Shafts |
| UL 1684 | Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| UL 1686 | Pin and Sleeve Configurations |
| UL 1692 | Polymeric Materials Coil Forms |
| UL 1694 | Tests for Flammability of Small Polymeric Component Materials |
| UL 2106 | Field Erected Boiler Assemblies |
| UL 60691 | Thermal Links Requirements and Application Guide |
Federal Register Notice: 75:21664-21666, April 26, 2010 |
|
| Designation | Title |
| UL 486A | Wire Connectors and Soldering Lugs for Use With Copper Conductors |
Federal Register Notice: 74:47026-47029, September 14, 2009 |
|
| Designation | Title |
| ANSI C37.38 | Gas Insulated, Metal Enclosed Disconnecting, Interrupter and Grounding Switches. |
| ANSI C37.72 | Manually Operated Dead Front, Pad-Mounted Switchgear with Load Interrupting Switches and Separable Connectors for Alternating Current System. |
| ANSI C57.12.28 | Switchgear and transformers Pad-Mounted Equipment Enclosure Integrity. |
| ANSI ICS 2 | Industrial Control Devices, Controllers and Assemblies. |
| UL 3 | Flexible Nonmetallic Tubing for Electric Wiring. |
| ANSI/NFPA 11A | Medium and High Expansion Foam Systems. |
| UL 45 | Portable Electric Tools. |
| ANSI/NFPA 72*** | Installation, Maintenance, and Use of Protective Signaling Systems. |
| UL 298 | Portable Electric Hand Lamps. |
| UL 351 | Rosettes. |
| UL 486B | Wire Connectors. |
| UL 511 | Porcelain Electrical Cleats, Knobs, and Tubes. |
| UL 1004A | Fire Pump Motors. |
| UL 1020 | Thermal Cutoffs for Use in Electrical Appliances and Components. |
| UL 1207 | Sewage Pumps for Use in Hazardous (Classified) Locations. |
| UL 1262 | Laboratory Equipment. |
| UL 1585 | Class 2 and Class 3 transformers. |
| UL 2083 | Halon 1301 Recovery/Recycling Equipment. |
| UL 2125 | Motor Operated Air Compressors for Use in Sprinkler Systems. |
| UL 3044 | Surveillance Closed Circuit Television Equipment. |
|
***Temporarily reinstated on March 2, 2010 (75 FR 9441) for the period from September 14, 2009, to September 14, 2011. |
|
Federal Register Notice: 70: 11273-11275, March 8, 2005 |
|
| Designation | Title |
|---|---|
| ANSI C57.12.57 | Ventilated Dry Type Network transformers 2500 kVA and Below, Three Phase |
| ANSI Z21.1b | Household Cooking Gas Appliances |
| ANSI Z21.12 | Draft Hoods |
| ANSI Z21.45 | Flexible Connectors of Other Than All Metal Construction for Gas Appliances |
| ANSI Z21.61 | Gas Fired Toilets |
| ANSI Z83.6 | Gas Fired Infrared Heaters |
| ASTM E2010** | Standard Test Method for Positive Pressure Fire Tests of Window Assemblies (not appropriate - no NRTL approval requirement for windows) |
| UL 9** | Fire Tests of Window Assemblies (not appropriate - no NRTL approval requirement for windows) |
| UL 297 | Acetylene Generators, Portable Medium Pressure |
| UL 1418 | Cathode Ray Tubes |
| UL 1459 | Telephone Equipment |
| UL 1950* | Information Technology Equipment, Including Electrical Business Equipment |
| UL 2601-1 | Medical Electrical Equipment, Part 1: General Requirements for Safety |
| UL 3111-2-31 | Hand-Held Probe Assemblies for Electrical Measurement and Test |
| FMRC 7812 | Industrial trucks LP Gas |
| FMRC 7816 | Industrial trucks LP Gas Dual Fuel |
| FMRC 7820 | Industrial trucks Electric |
|
* The comparable standard for UL 1950 is UL 60950, which was added to each applicable NRTL's recognition through a previous notice (67 FR 30975, 5/8/02). ** This standard is no longer applicable because there is no NRTL approval requirement for windows. |
|
Federal Register Notice: 68:579-583, January 6, 2003 |
|
| Designation | Title |
| ANSI C37.71 | Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems |
| ANSI C57.12.13 | Liquid-Filled transformers Used in Unit Installations including Unit Substations-Conformance Requirements |
| ANSI C57.12.21 | Pad Mounted Compartmental-Type Self-Cooled Single-Phase Distribution transformers with High Voltage Bushings; 167 kVA and Smaller |
| ANSI C57.12.27 | Liquid Filled Distribution transformers Used in Pad Mounted Installations, Including Unit Substations–Conformance Requirements |
| ANSI C62.1 | Gapped Silicon-Carbide Surge Arresters for AC Power Circuits |
| ANSI S12.12 | Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations |
| ANSI Z21.10.2 | Water Heaters–Sidearm Type Water Heaters |
| ANSI Z21.11.1 | Gas-Fired Room Heaters- Vented Room Heaters |
| ANSI Z21.14 | Approval Requirements for Industrial Gas Boilers |
| ANSI Z21.16 | Gas Unit Heaters |
| ANSI Z21.29 | Listing Requirements for Furnace Temperature Limit Controls and Fan Controls |
| ANSI Z21.37 | Approval Requirements for Dual Oven Type Combination Gas Ranges |
| ANSI Z21.48 | Gas-Fired Gravity and Fan Type Floor Furnaces |
| ANSI Z21.49 | Gas-Type Gravity and Fan Type Vented Wall Furnaces |
| ANSI Z21.53 | Gas-Fired Heavy Duty Forced Air Heaters |
| ANSI Z21.55 | Gas-Fired Sauna Heaters |
| ANSI Z21.70 | Earthquake Actuated Automatic Gas Shutoff Systems |
| ANSI Z83.3 | Gas Utilization Equipment in Large Boilers |
| ANSI Z83.10 | Separated Combustion System Central Furnaces |
| ANSI Z83.17 | Direct Gas Fired Door Heaters |
| UL 136 | Pressure Cookers (not appropriate - no NRTL approval requirement) |
| UL 198B | Class H Fuses |
| UL 198C | High-Interrupting-Capacity Fuses, Current Limiting Type |
| UL 198D | Class K Fuses |
| UL 198E | Class R Fuses |
| UL 198F | Plug Fuses |
| UL 198G | Fuse for Supplementary Overcurrent Protection |
| UL 198H | Class T Fuses |
| UL 198L | D-C Fuses for Industrial Use |
| ANSI/NEMA 250 | Enclosures for Electrical Equipment |
| UL 900 | Air-Filter Units (not appropriate - no NRTL approval requirement) |
| UL 910 | Test for Flame-Propagation and Smoke-Density Values for Electrical and Optical-Fiber Cables Used in Spaces transporting Environmental Air |
| UL 1087 | Molded-Case Switches |
| UL 1270 | Radio Receivers, Audio Systems, and Accessories |
| UL 1409 | Low-Voltage Video Products Without Cathode-Ray-Tube Displays |
| UL 1410 | Television Receivers and High-Voltage Video Products |
| UL 1570 | Fluorescent Lighting Fixtures |
| UL 1571 | Incandescent Lighting Fixtures |
| UL 1572 | High Intensity Discharge Lighting Fixtures |
| UL 3101-1 | Electrical Equipment for Laboratory Use; Part 1: General Requirements |
| UL 3101-2-20 | Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges |
| UL 3111-1* | Electrical Measuring and Test Equipment; Part 1: General Requirements |
| UL 3121-1 | Process Control Equipment |
| UL 8730-1 | Electrical Controls for Household and Similar Use; Part 1: General Requirements |
| UL 8730-2-3 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors for Ballasts for Tubular Fluorescent Lamps (withdrawal pending) |
| UL 8730-2-4* | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors for Motor Compressors or Hermetic and Semi-Hermetic Type |
| UL 8730-2-6 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements |
| UL 8730-2-7 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches |
| UL 8730-2-8 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves |
| UL 8730-2-9* | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Temperature Sensing Controls |
| UL 8730-2-14 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators |
| UL 60730-1** | Automatic Electrical Controls for Household and Similar Use; Part 1: General Requirements |
| UL 60730-2-10 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically-Operated Motor Starting Relays |
| UL 60730-2-11 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators |
| UL 60730-2-12 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically-Operated Doors |
| UL 60730-2-13 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls |
| UL 60730-2-16 | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level-Operating Controls of the Float Type for Household and Similar Applications |
|
* Withdrawal of this standard was pending on the date of the notice. The standard has since been withdrawn. ** Inadvertently excluded from the list of standards being removed from UL's scope of recognition. The comparable standard that was added to UL's scope was UL 60730-1A. |
|
Federal Register Notice: 66:47505-47508, September 12, 2001 |
|
| Designation | Title |
| ANSI C57.13.2 | Instrument transformers -- Conformance Test Procedures |
| ANSI S12.13 | Performance Requirements for Combustible Gas Detectors |
| ANSI S12.13.1 | Performance Requirements for the Combustible Gas Detectors |
| ANSI S12.15 | Hydrogen Sulfide Detection Instruments |
| ANSI S82.03 | Electrical and Electronic Process Measuring and Control |
| ANSI Z21.5 | Gas Clothes Dryers (now have multiple parts) |
| ANSI Z21.10 | Gas Water Heaters (now have multiple parts) |
| ANSI Z21.11 | Unvented Room Heaters (now have multiple parts) |
| ANSI Z21.44 | Gas-Fired Gravity and Fan Type Direct Vent Wall Furnaces |
| ANSI Z21.64 | Direct Vent Central Furnace |
| ANSI Z83.9 | Gas-Fired Duct Furnaces |
| ANSI Z83.12 | Gas Food Service Equipment - Baking and Roasting Ovens |
| ANSI Z83.13 | Gas Food Service Equipment - Deep Fat Fryers |
| ANSI Z83.14 | Gas Food Service Equipment - Counter Appliances |
| ANSI Z83.15 | Gas Food Service Equipment - Kettles, Steam Cookers, and Steam Generators |
| ANSI Z83.16 | Gas-Fired Unvented Commercial and Industrial Heaters |
| ASTM E152 | Standard Methods of Fire Tests of Door Assemblies |
| ASTM E163 | Standard Methods of Fire Tests of Window Assemblies |
| UL 14 | Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly or In Pairs |
| UL 114 | Electric Office Appliances and Business Equipment |
| UL 133 | Wires and Cables With Varnished Cloth Insulation |
| UL 303 | Refrigeration and Air-Conditioning Condensing and Compressor Units |
| UL 408 | Stationary Medium Pressure Acetylene Generators |
| UL 409 | Stationary Low-Pressure Acetylene Generators |
| UL 465 | Central Cooling Air Conditioners |
| UL 478 | Information-Processing and Business Equipment |
| UL 519 | Impedance-Protected Motors |
| UL 543 | Electrical Impregnated-Fiber Conduit |
| UL 547 | Thermal Protectors for Electric Motors |
| UL 559 | Heat Pumps |
| UL 560 | Electric Home-Laundry Equipment |
| UL 611 | Central-Station Burglar-Alarm Systems |
| UL 869 | Service Equipment |
| UL 883 | Fan-Coil Units and Room-Fan Heater Units |
| UL 962 | Household and Commercial Furnishings |
| UL 1025 | Electric Air Heaters |
| UL 1092 | Process Control Equipment (not formally established) |
| UL 1096 | Electric Central Air-Heating Equipment |
| UL 1438 | Household Electric Drip-Type Coffee Makers |
| UL 1555 | Electric Coin-Operated Clothes-Washing Equipment |
| UL 1556 | Electric Coin-Operated Clothes-Drying Equipment |
| UL 1624 | Light Industrial and Fixed Electric Tools |
| UL 1663 | Electric Hot Tubs, Spas, and Associated Equipment |