Eye and face protection must be worn where there is potential for injury to the eyes or face. [1910.266(d)(1)(vii)] The protective equipment must comply with ANSI standards [1910.133(b)] (Subpart I, ANSI Z87.1-1989 if purchased after July 5, 1994, or ANSI Z87.1-1968 if purchased before July 5, 1994).

Logger type mesh screens are considered to be adequate eye and face protection for chain saw operators.

 Additional Information:

• 29 CFR 1910 Subpart R, Special industries. OSHA Standard.

  • 1910.266(d)(1)(vii)

• Logging. OSHA Preambles to Final Rules, (1994).
• Logging Operations. OSHA Federal Register 60:47022-47037, (September 8, 1995). [See Paragraph (d)(1)(vii) - Face Protection.]
• Logging Operations, Inspection Procedures and Interpretive Guidance Including Twelve Previously Stayed Provisions. OSHA Directive CPL 02-01-022 [CPL 2-1.22], (September 27, 1996). [See Definitions and clarifications: Paragraph (d) - General Requirements - Eye and Face protection.]