1
03/29/2023
Application of OSHA standards when an employer is using the "Focused Electrode Leak Locator" (FELL)
2
12/16/2013
Application of 29 CFR 1910 Subpart S to design of industrial machinery
3
04/24/2012
NRTL requirements for shielding gas regulators.
4
07/24/2006
Approval of employee-furnished equipment for use in hazardous locations; definition of "electric utilization equipment."
5
10/27/2005
Acceptability of using a light switch as a disconnecting means for the electrical lockout/tagout standard.
6
10/24/2005
The definition of "Readily accessible" does not necessarily preclude the locking of electrical panels, provided those needing ready access are provided a key or lock combination.
7
08/10/2005
Approval requirements for replacement, modification, repair, or rehabilitation of electrical utilization equipment.
8
02/01/2005
Use of personal cooling fans listed for "residential use only" in an industrial setting.
9
05/11/2004
Electrical equipment approved by a NRTL is acceptable to OSHA.
10
04/05/2004
Acceptability of locking switches in the closed (on) position for transformers attached to the main bus duct system.
11
03/31/2004
Fixed Wiring in Research Facilities and High Voltage Cable Tray Systems at Department of Energy (DOE) Research Laboratories
12
11/26/2003
Electrical equipment grounding requirements on concrete floors.
13
08/26/2003
Installation and use of electrical equipment must be consistent with NRTL intructions for that equipment.
14
08/22/2003
Use of portable vacuum cleaners for cleaning up aluminum and wood dust.
15
05/13/2003
Acceptability of modifying a standard on/off switch to provide lockout capability to a machine.
16
05/12/2003
Electrical safety requirements for rechargeable racks for paging transmitters.
17
08/08/2002
Applicable OSHA standards and safety considerations for microwave device use in a laboratory
18
11/16/2000
Applicability of OSHA's LOTO standards; isolation and verification procedures.
19
12/18/1997
Electrical Conductor Identification.
20
01/14/1997
Clarification of the OSHA standards applicable to H. VIR (inspection) Windows installed in electrical equipment enclosures.
21
03/12/1996
Grounding requirements with respect to a battery charger used with rechargeable power tools.
22
09/01/1995
The Canadian Standards Association, a nationally recognized testing laboratory, marking and double insulated tools
23
06/07/1995
Variance request.
24
12/14/1994
Certification of manufactured products intended for use in the workplace
25
08/24/1993
All electrical equipment must be approved.
26
02/18/1992
Electrical standards as it applies to desktop computers.
27
12/27/1991
Use of general protective equipment and tools by employees when working near exposed energized conductors or circuit parts in the workplace
28
10/08/1991
The use of Maxon-CS-0520-HD VHF transceivers.
29
07/05/1990
Repair/Rebuilding of UL Listed Equipment for Hazardous Locations.
30
02/28/1990
The listing requirements in the U.S. for Industrial Packaging equipment.
31
01/09/1989
Interpretation concerning dry type 5-15 kv transformers and definitions of the terms "acceptable" and "special equipment".
32
10/29/1986
Testing equipment for use in potentially hazardous environments.
33
07/16/1985
Nationally recognized testing laboratories evaluate safety features of electrical devices.
