1
10/15/2024
- 1910.147 -
Inspection Guidance for Animal Slaughtering and Processing Establishments
2
08/31/2021
- 1910.147 -
Trip and Emergency Switches on Mills and Calenders
3
09/22/2014
- 1910.147 -
Electronic Certification of Training
4
12/12/2012
- 1910.147 -
Whether an LED type device ca be used for the isolation and deenergization verification requirements of 1910.147 and 1910.333.
5
08/02/2012
- 1910.147 -
Clarification on the use of a tagout device when an energy isolating device is capable of being locked out.
6
04/03/2012
- 1910.147 -
Application of Lockout/Tagout to Employees Performing Maintenance Tasks on Cord and Plug Equipment
7
08/30/2011
- 1910.147 -
Use of local valves as a means of equipment isolation for energy control.
8
08/04/2011
- 1910.147 -
Numerous questions on lockout/tagout under 1910.147 and 1910.269
9
11/30/2010
- 1910.147 -
Numerous questions on lockout/tagout under 1910.147 and Subpart S.
10
01/25/2008
- 1910.147, 1910.147(a)(2)(ii), 1910.147(b) -
Use of a PLC system as an alternative measure which provides effective protection for minor servicing activities.
11
05/04/2007
- 1910.147, 1910.147(a)(2)(ii), 1910.147(b), 1910.147(f)(1) -
Lockout/Tagout and the provisions for testing or positioning of machines while they are energized.
12
04/23/2007
- 1910.147, 1910.147(b), 1910.147(c)(7), 1910.147(c)(7)(iii)(A), 1910.147(c)(7)(iii)(B), 1910.147(f)(2)(i) -
Application of Control of Hazardous Energy (LOTO) requirements to compressed gas cylinders.
13
04/18/2007
- 1910.147, 1910.147(d)(5)(ii) -
PRCS and LOTO requirements for accumulation of stored energy in steam pits
14
02/26/2007
- 1910.147, 1910.147(a)(2)(ii), 1910.147(b) -
Evaluation of the ElectroGuard disconnect system for use as an energy isolating device.
15
12/28/2006
- 1910.147, 1910.147(a)(2)(ii), 1910.147(a)(2)(iii)(A), 1910.147(b) -
Application of the Lockout/Tagout standard to die-setting activities and other machine setup operations.
16
10/11/2006
- 1910.147, 1910.147(a)(1)(i), 1910.147(c)(5)(ii) -
Use of LOTO device on equipment placed in "out of service" status not related to servicing or maintenance.
17
08/25/2006
- 1910.147, 1910.147(a)(2)(ii), 1910.147(b), 1910.147(f)(1) -
Several questions regarding OSHA's LOTO and Bakery standards 29 CFR 1910.147 and 1910.263.
18
07/28/2006
- 1910.147 -
Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
19
07/12/2006
- 1910.147, 1910.147(c)(4)(ii) -
PSM compliance for ammonia refrigeration systems.
20
05/09/2006
- 1910.147, 1910.147(c)(4)(i) -
Use of additional lock on a conveyor and baler system exceeds one lockout device.
21
01/18/2006
- 1910.147, 1910.147(a)(2)(ii) -
Interlock requirements for access door(s) of trash compactor.
22
10/24/2005
- 1910.147, 1910.147(c)(7)(i) -
Training programs for the Control of Hazardous Energy (LOTO) and for the Hazard Communication standard are not satisfied solely by merely providing employees written documentation.
23
08/24/2005
- 1910.147, 1910.147(a)(2)(ii), 1910.147(a)(2)(iii)(A) -
Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes.
24
07/07/2005
- 1910.147 -
Machine guarding and exposure to hazards from robotic laundry shuttles.
25
04/22/2005
- 1910.147, 1910.147(a)(2)(ii), 1910.147(b), 1910.147(d), 1910.147(f)(1) -
Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
26
11/10/2004
- 1910.147, 1910.147(c)(4)(ii) -
Recognition of ANSI/ASSE Z244.1 "Control of Hazardous Energy - Lockout/Tagout and Alternative Methods" consensus standard
27
04/07/2004
- 1910.147, 1910.147(f)(1), 1910.147(a)(2)(ii), 1910.147(a)(3)(ii) -
Printing Industry: Lock Out/Tag Out and the essential elements of the inch-safe-service technique
28
06/13/2003
- 1910.147 -
Response to Edison Electric Institute's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
29
06/13/2003
- 1910.147 -
Response to Exelon Generation's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
30
05/13/2003
- 1910.147, 1910.147(c)(3), 1910.147(c)(2)(iii) -
Acceptability of modifying a standard on/off switch to provide lockout capability to a machine.
31
12/02/2002
- 1910.147 -
Applicability of the confined-space standard to dock-leveler pits.
32
08/30/2002
- 1910.147, 1910.147(c)(5)(ii)(B) -
Color is not the only prescribed factor for the standardization of LOTO devices.
33
07/08/2002
- 1910.147, 1910.147(c)(5) -
Use of verification tags for lockout.
34
11/16/2000
- 1910.147 -
Applicability of OSHA's LOTO standards; isolation and verification procedures.
35
07/10/2000
- 1910.147, 1910.147(e)(3) -
Evaluation of proposed modifications to the Bureau of Prisons' Lockout/Tagout (LOTO) procedures.
36
11/10/1999
- 1910.147 -
LOTO of hydraulic systems; postal workers' exposure to hazardous material spills.
37
02/26/1999
- 1910.147, 1910.147(a)(2)(ii)(A), 1910.147(a)(2)(ii)(B), 1910.147(a)(2)(iii)(A) -
OSHA enforcement policy on vertical food mixers.
38
02/27/1997
- 1910.147 -
Clarification on entitlement of a copy of energy control program documentation at meat packing plant.
39
10/29/1996
- 1910.147 -
Consultants performing lockout/tagout periodic inspections.
40
10/02/1996
- 1910.147 -
Food Inspectors lockout/tagout procedures.
41
09/11/1996
- 1910.147 -
Voluntary safety and health audits under the Occupational Safety and Health Act
42
05/15/1996
- 1910.147 -
Electrical generators in hospitals and the control of hazardous energy.
43
10/27/1995
- 1910.147 -
Guidance in determining whether elevator pits meet the definition of confined spaces.
44
09/27/1995
- 1910.147 -
Interpretation of the Process Safety Management of Highly Hazardous Chemicals Standard.
45
08/28/1995
- 1910.147 -
The Lockout/Tagout Standard.
46
05/24/1995
- 1910.147 -
Clarification concerning the Electric Power Generation, Transmission, and Distribution standard.
47
11/15/1993
- 1910.147 -
Permit-Required Confined Spaces: metal container curing ovens.
48
06/14/1993
- 1910.147 -
Applicability of the Machine Guarding and Lockout/Tagout standards to printing presses
49
09/16/1992
- 1910.147 -
Printing Presses: requirements for normal production and servicing operations
50
08/05/1991
- 1910.147 -
Motor starter circuits and energy isolation devices
51
06/04/1991
- 1910.147 -
Interpretation of 1910.147, related to floating fish processors.
52
04/10/1991
- 1910.147 -
Work permits in lockout/tagout standard requirements